US Steel & Aluminum Tariffs

[Officer of Engineers]

So you against the OBL hit now? You think they should have got a pass?

You asked what he has done when the allies didn't fall into line. He attacked their sovergnty. Whatever good that came out of chucking that piece of shit into the ocean does not change the fact that Obama didn't give one hoot about his ally. Considering the continued drone attacks inside Pakistan after that, Obama expected and got Pakistan to fall into line.

That is far more adverse than having trade disputes when you can violate your ally's airspace and lands with impunity.

[antimony]

You asked what he has done when the allies didn't fall into line. He attacked their sovergnty. Whatever good that came out of chucking that piece of shit into the ocean does not change the fact that Obama didn't give one hoot about his ally. Considering the continued drone attacks inside Pakistan after that, Obama expected and got Pakistan to fall into line.

That is far more adverse than having trade disputes when you can violate your ally's airspace and lands with impunity.

I recall vividly, on this very board, American WABBERS arguing with the Pakistani WABBERs that the OBL hit was in fact legal as US and Pakistan were allies and OBL was recognized as an enemy of both. Therefore

But we were talking about the Brits. What actions, specifically, did Obama take against Britain when the Parliament struck the Syrian Strike proposal down?

[Officer of Engineers]

I recall vividly, on this very board, American WABBERS arguing with the Pakistani WABBERs that the OBL hit was in fact legal as US and Pakistan were allies and OBL was recognized as an enemy of both. Therefore

But we were talking about the Brits. What actions, specifically, did Obama take against Britain when the Parliament struck the Syrian Strike proposal down?

You asked two questions:

1) How did Obama expects everyone to fall into line - the Brits answered the question.

2) What did Obama do when they didn't fall into line - the Pakistanis answered that question.

[antimony]

You asked two questions:


1) How did Obama expects everyone to fall into line - the Brits answered the question.

2) What did Obama do when they didn't fall into line - the Pakistanis answered that question.

Col,

I asked, very specifically, what Obama did to the Brits when they did not fall in line. Sanctions? Tariff?

If you would like to discuss OBL then I would respectfully refer you to this thread (with a certain Officer of Engineers). Please direct any outrage to Agnostic Muslim and others.

http://www.worldaffairsboard.com/sho...ighlight=laden

[Officer of Engineers]

Col,

I asked, very specifically, what Obama did to the Brits when they did not fall in line. Sanctions? Tariff?

He blamed the Brits for his own failure to strike at Syria. He publically took "the high road" of refusing to strike despite pleas from the Establishment, ignoring the fact that it was he whom in fact screamed "charge" in the first place. Counted in that Establishment are the Brits.

This is the point where he begged Putin to save his ass.

If you would like to discuss OBL then I would respectfully refer you to this thread (with a certain Officer of Engineers). Please direct any outrage to Agnostic Muslim and others.

http://www.worldaffairsboard.com/sho...ighlight=laden

The point here is that Obama didn't give a rat's ass about Pakistani sovergnty. I am not discussing the legality of the strike here. Frankly, at that point, I totally expected the fiction that Pakistan is an ally to be dropped but instead, Obama found it more convient to keep them on a tighter leash.

[astralis]

yet Allied discontent with Trump far surpasses Allied discontent with Obama. the question is what did the US gain from the discontent.

in the OBL case, turning OBL into jelly was a US national security objective that far outweighed the concerns of a putative ally. in this case, it's...ah, not clear whether a squabble over tariffs outweighs the concerns of our far better allies.

[antimony]

He blamed the Brits for his own failure to strike at Syria. He publically took "the high road" of refusing to strike despite pleas from the Establishment, ignoring the fact that it was he whom in fact screamed "charge" in the first place. Counted in that Establishment are the Brits.

Yes, Obama the typical liberal bleeding heart SJW chickenshit.

Now that we got that out our system, I would like to come back to my question.

What did Obama do to the Brits (not Pakistanis, Syrians, Canadians, Russians or anybody else) when they did not fall in line? Did he impose sanctions? Did he slap tariffs? Did he vote against UK interests anywhere? Did he send Seal Team Six after the Korgis? What, specifically did he do?

[Officer of Engineers]

Now that we got that out our system, I would like to come back to my question.

What did Obama do to the Brits (not Pakistanis, Syrians, Canadians, Russians or anybody else) when they did not fall in line? Did he impose sanctions? Did he slap tariffs? Did he vote against UK interests anywhere? Did he send Seal Team Six after the Korgis? What, specifically did he do?

Question has been answered. Just because you do not like the answer does not make the answer any less valid. He blamed the Brits.

[antimony]

Question has been answered. Just because you do not like the answer does not make the answer any less valid. He blamed the Brits.

Ah, thanks for making that clear. I was expecting something more dramatic and punitive than "He blamed the Brits". In other words, he did nothing apart from issuing some whiny-ass statements.

[DOR]

This is the point where he begged Putin to save his ass.
.

Every memoir I’ve seen has it exactly the other way around.

Snowden was camped out in the Moscow airport, and Obama asked Putin to send him back. Putin gave him asylum, so Obama cancelled the planned summit meeting. That's the background to the state of tension between the US and Russia.

A month or two later, in August 2013, Assad killed some 1,400 of his own people with chemical weapons. Secretary of State John Kerry said it was time to remove his chemical weapons ability, and perhaps to remove Assad from power. Obama said he had the power and the will to go into Syria and destroy its chemical weapons capability, but that he would ask for congressional approval. That's for the haters who say he was abusing presidential authority.

With a day or two to go, Putin said, wait. Let me deal with this.
Foreign Minister Sergey Lavrov got an agreement from Assad to turn over his chemical weapons to Russia, and Obama agreed that would be sufficient.

Since Obama didn’t have a strong coalition behind him, and just about every military adviser said “don’t get into a ground war in the middle east,” he agreed.

And, on September 9, Ann Coulter makes her only deliberately truthful statement about the Obama Administration: “This is just his way of saying we’re not interested in getting into the Syrian civil war.”

[DOR]

Trade war, round two

The US and China announced new import duties on their own imports, thereby confirming that the protectionist is the stupidest kind of economic criminal.

Because Washington is unhappy with Beijing, America will punish the people and companies in America that buy the following things from China:

Lubricating oils _ _ Lubricating greases
Polyethylene _ _ Ethylene copolymer _ _ Ethylene-vinyl acetate copolymers
Polymers of ethylene _ _ Polypropylene _ _ Polyisobutylene
Propylene copolymers _ _ Polystyrene _ _ Styrene-acrylonitrile
ABS copolymers _ _ MBS copolymers _ _ Polymers of styrene
Polyvinyl chloride _ _ Vinyl chloride copolymer _ _ Vinylidene chloride polymers
PTFE _ _ Fluoropolymers, elastomeric, other than polytetrafluoroethylene
Polymers of vinyl chloride or of other halogenated olefins,
Polyvinyl acetate, in aqueous dispersion _ _ Vinyl acetate copolymers, in aqueous dispersion
Polyvinyl alcohols _ _ Copolymers of vinyl esters _ _ Polymethyl methacrylate
Acrylic polymers (except PMMA) s, elastomeric
Polyacetals _ _ Polyethers, other than polyacetals, _ _ Epoxide resins
Polycarbonates _ _ Alkyd resins _ _ Polyethylene terephthalate
Poly(lactic acid) _ _ Unsaturated allyl resins
Thermoplastic liquid crystal aromatic polyester copolymers
Polyamide-6, -11, -12, -6,6, -6,9, -6,10 or -6,12
Bis(4-amino-3-methylcyclohexyl)methaneisophthalic acid-laurolactam copolymer
Urea resins; thiourea resins _ _ Melamine resins _ _ Phenolic resins
Polyurethanes, elastomeric, _ _ Polyurethanes: cements, _ _ Silicones
Petroleum resins, coumarone, indene, or coumarone-indene resins and polyterpenes,,_ _
Elastomeric polysulfides, polysulfones _ _ carbodiimide or homopolymer
Thermoplastic polysulfides, polysulfones
Benzenamine; and hydrocarbon novolac cyanate ester
Thermosetting polysulfides, polysulfones
Chlorinated synthetic rubber _ _ Polysulfides, polysulfones
Cellulose acetates, plasticized _ _ Cellulose nitrates (including collodions)
Cellulose and its chemical derivatives, _ _ Alginic acid, and its salts and esters,
Chemical derivatives of natural rubber _ _ Natural polymers and modified natural polymers
Cross-linked polyvinylbenzyltrimethylammonium chloride (Cholestyramine resin USP)
Ion-exchangers _ _ Monofilament _ _ Rods, sticks and profile shapes, of plastics
Plastic, PVC, etc tubes, pipes and hoses _
Self- and non-adhesive plates, sheets, other flat shapes, of plastics,
Glass rods of fused quartz or other fused silica_ _

Metal
Iron or steel, bridges and bridge sections _ _ Iron or steel, towers and lattice masts
Iron or steel columns, pillars, posts, beams and girders _ _ Steel, grating for structures
Aluminum, stranded wire, cables & the like
Steam turbines other than for marine propulsion _ _ Spark-ignition reciprocating piston engines
Compression-ignition internal-combustion piston engines
Machinery for liquefying air or gas _ _ Machinery and equipment for making paper pulp, paper or paperboard
Industrial machinery, plant or equipment for the treatment of materials, by process, involving a change in temperature
Calendering or similar rolling machines for making paper pulp, paper or paperboard
Parts of calendering or rolling machines for processing textiles
Agricultural or horticultural projecting or dispersing equipment including irrigation,equipment
Harrows (other than disc), scarifiers, cultivators, weeders and hoes for soil,preparation or cultivation
No-till direct seeders, planters and transplanters _ _ Fertilizer distributors
Parts of photocopying apparatus _ _ Parts for metal-rolling mills,
Sawing machines for working stone, ceramics, concrete or for cold working glass
Drilling or mortising machines for working wood, cork, bone, hard rubber, hard,plastics or similar hard materials
Splitting, slicing or paring machines for working wood, cork, bone, hard rubber, hard,plastics or similar hard materials
Part/accessory of printed circuit assemblies _ _ Machines for manufacturing or hot working glass or glassware,
Bearing housings plain shaft bearings _ _ Machines and apparatus for the manufacture of boules or wafers
Machines and apparatus for the manufacture of semiconductor devices or electronic,integrated circuits
Machines and apparatus for the manufacture of flat panel displays
Machines and apparatus for the manufacture of masks and reticles; for the assembly,of electronic integrated circuits;
Parts and accessories of the machines and apparatus for the manufacture of, semiconductor devices, electronic integrated circuits and flat panel
Electric motors _ _ Universal AC/DC motors
Other storage batteries _ _ Voltage and voltage-current regulators
Other antennas and antenna reflectors of all kinds and parts, for use
Electrical apparatus for protecting electrical circuits_ _ Certain specified electronic and electromechanical snap-action switches,
Connectors for optical fibers, optical fiber bundles or cables
Electric control panels _ _ Diodes, other than photosensitive or light-emitting diodes
Diodes for semiconductor devices, other than light-emitting diodes
Electronic integrated circuits: processors and controllers
Electronic integrated circuits: memories _ _ Electronic IC amplifiers
Synchros and transducers; defrosters and demisters with electric, resistors for aircraft
Insulated electric conductors of a kind used for telecommunications,

Vehicles
Rail locomotives powered by batteries _ _ Diesel-electric locomotives
Railway or tramway passenger coaches and tank cars
Parts of railway/tramway locomotives/rolling stock
Containers (including containers for transport of fluids)
Road tractors for semi-trailers _ _ Track-laying tractors,
Tractors for agricultural use _ _ tractors not for agricultural use
Motorcycles (incl. mopeds) _ _ Vessels, designed for refrigerated vessels
Floating docks

Instruments
Optical fibers, optical fiber bundles and cables _ _ Sheets and plates of polarizing material
Direction finding compasses _ _ Pyrometers _ _ Thermometers
Electrical: hydrometers & sim. floating instr., hygrometers, psychometers, & any,comb.
Electrical gas or smoke analysis apparatus _ _ Microtomes
Gas supply or production meters _ _ Liquid supply or production meters,
Electricity supply or production meters _ _ Speedometers and tachometers,
Parts and accessories of revolution counters
Multimeters for measuring or checking electrical voltage, current, resistance
Multimeters, with a recording device
Instruments and apparatus for measuring, checking or detecting electrical quantities, or ionizing radiations: with a recording device
Aircraft tires

Nuclear reactors _ _ Parts of nuclear reactors
Machinery and apparatus for isotopic separation _ _ Fuel elements (cartridges), non-irradiated
Watertube boilers _ _ Vapor-generating boilers, including _ _ Super-heated water boilers
Steam turbines for marine propulsion
Spark-ignition reciprocating or rotary internal combustion piston engines for use in aircraft
Marine propulsion engines for outboard motors _ _ Agricultural propulsion engines
Parts for internal combustion aircraft engines
Hydraulic turbines and water wheels _ _ Aircraft turbojets _ _ Aircraft turbo propellers
Reaction engines other than turbojets _ _ Hydraulic power engines and motors
Hydrojet engines for marine propulsion _ _ Pneumatic power engines
Spring-operated and weight-operated motors _ _ Pumps for liquids
Liquid elevators _ _ Parts of fuel-injection pumps _ _ Parts of stock pumps
Compressors of a kind used in refrigerating equipment
Turbocharger and supercharger fans _ _ Turbocharger and supercharger air compressors
Stators and rotors _ _ Parts of air or gas compressors, _ _ Parts of air or vacuum pumps
Parts for furnace burners, mechanical stokers, mechanical grates, mechanical ash dischargers
Furnaces and ovens for the roasting, melting or other heat treatment of ores, pyrites or of metals
Industrial or laboratory furnaces and ovens _ _ Parts thereof
Refrigerating or freezing equipment _ _ Instantaneous gas water heaters, nonelectric
Storage water heaters, nonelectric _ _ Dryers for agricultural products,
Dryers for wood _ _ Dryers for paper pulp, paper or paperboard
Distilling or rectifying plant, not used for domestic purposes
Heat exchange units, _ _ Machinery for liquefying air or gas,
Parts of instantaneous or storage water heaters; machinery and plant, for making paper pulp, paper or paperboard; heat exchange units; molten-salt-cooled acrylic acid reactors; certain medical, surgical or laboratory sterilizers; electromechanical tools; or for machinery, plant or laboratory equipment
Calendering or other rolling machines, other than for metals or glass,
Cylinders for textile calendering or rolling machines
Cylinders for paper pulp, paper or paperboard calendering or rolling machines
Cylinders for calendering and similar rolling machines
Parts of calendering or rolling machines for making paper pulp, paper or paperboard
Parts of calendering or other rolling machines, other than for metals or glass
Centrifuges, other than cream separators or clothes dryers
Machinery and apparatus for filtering or purifying water
Machinery and apparatus for filtering or purifying beverages other than water
Filtering or purifying machinery and apparatus for liquids
Catalytic converters
Filtering or purifying machinery and apparatus for gases, other than intake air filters for internal combustion engines or catalytic conv.
Parts of centrifuges, including centrifugal dryers
Parts for filtering or purifying machinery or apparatus for liquids or gases
Dishwashing machines other than of the household type
Machinery for cleaning or drying bottles or other containers
Can-sealing machines
Machinery for filling, closing, sealing, capsuling or labeling bottles, cans, boxes or other containers; machinery for aerating beverages; nesoi
Machinery for packing or wrapping pipe tobacco, candy and cigarette packages; combination candy cutting and wrapping machines
Packing or wrapping machinery
Parts of dishwashing machines
Parts of packing or wrapping machinery
Scales for continuous weighing of goods on conveyors using electronic means for gauging weights
Other scales for continuous weighing of goods on conveyors
Constant weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales
Weighing machinery having a maximum weighing capacity exceeding 30 kg but not exceeding 5000 kg
Weighing machinery with maximum capacity exceeding 5000 kg, using electronic means for gauging
Weighing machinery with maximum capacity exceeding 5000 kg, not using electronic means for gauging nesoi
Parts of weighing machinery using electronic means for gauging, except parts for weighing motor vehicles
Other parts of weighing machinery, including weights
Mechanical appliances for projecting, dispersing or spraying liquids or powders, used for making printed circuits or printed circuit assemblies
Parts of sand blasting machines
Pulley tackle and hoists other than skip hoists or hoists used for raising vehicles, powered by electric motor
Winches nesoi, and capstans, not powered by electric motor
Derricks, cranes and other lifting machinery nesoi, self-propelled, on tires
Derricks, cranes and other lifting machinery nesoi, self-propelled, not on tires
Derricks, cranes and other lifting machinery nesoi
Self-propelled works trucks powered by an electric motor, rider type forklift trucks
Self-propelled works trucks powered by an electric motor, fitted with lifting and handling equipment
Self-propelled works trucks not powered by an electric motor, rider type forklift trucks
Self-propelled works trucks not powered by an electric motor, fitted with lifting and handling equipment
Pneumatic elevators and conveyors
Continuous-action elevators and conveyors, for goods or materials, specially designed for underground use
Bucket type continuous-action elevators and conveyors, for goods or materials
Belt type continuous-action elevators and conveyors, for goods or materials
Continuous-action elevators and conveyors, for goods or materials
Machinery for lifting, handling, loading or unloading
Self-propelled bulldozers and angledozers, for track laying
Self-propelled bulldozers and angledozers other than track laying
Self-propelled graders and levelers
Self-propelled scrapers
Self-propelled tamping machines and road rollers
Self-propelled front-end shovel loaders, wheel-type
Self-propelled front-end shovel loaders, other than wheel-type
Self-propelled backhoes, shovels, clamshells and draglines with a 360 degree revolving superstructure
Self-propelled machinery with a 360 degree revolving superstructure, other than backhoes, shovels, clamshells and draglines
Self-propelled backhoes, shovels, clamshells and draglines not with a 360 degree revolving superstructure
Self-propelled machinery not with a 360 degree revolving superstructure, other than backhoes, shovels, clamshells and draglines
Pile-drivers and pile-extractors
Self-propelled coal or rock cutters and tunneling machinery
Coal or rock cutters and tunneling machinery, not self-propelled
Self-propelled boring or sinking machinery
Boring or sinking machinery, not self-propelled
Self-propelled machinery for working earth, minerals or ores
Tamping or compacting machinery, not self-propelled
Machinery for working earth, minerals or ores, not self-propelled
Parts suitable for use solely or principally with the machinery of heading 8425
Parts suitable for use solely or principally with the machinery of heading 8427
Parts suitable for use solely or principally with passenger or freight elevators other than continuous action, skip hoists or escalators
Parts suitable for use solely or principally with the machinery of heading 8428 nesoi
Buckets, shovels, grabs and grips suitable for use solely or principally with the machinery of headings 84268429 or 8430
Bulldozer or angledozer blades suitable for use solely or principally with the machinery of heading 8426 8429 or 8430
Parts for offshore oil & natural gas, drilling and production platforms
Parts for boring or sinking machinery of 8430.41 or 8430.49 nesoi
Parts suitable for use solely or principally with the machinery of heading 8426 nesoi
Parts suitable for use solely or principally with the machinery of heading 8429 or 8430 nesoi
Plows for soil preparation or cultivation
Disc harrows for soil preparation or cultivation
Agricultural, horticultural or forestry machinery for soil preparation or cultivation; lawn or sports ground rollers
Parts of agricultural, horticultural or forestry machinery for soil preparation or cultivation; parts of lawn or sports ground rollers
Mowers nesoi, including cutter bars for tractor mounting
Haymaking machinery other than mowers
Straw or fodder balers, including pick-up balers
Combine harvester-threshers
Threshing machinery other than combine harvester-threshers
Root or tuber harvesting machines
Harvesting machinery or threshing machinery
Machines for cleaning, sorting or grading eggs, fruit or other agricultural produce
Parts for machinery of heading 8433 nesoi
Dairy machinery other than milking machines
Parts for milking machines and dairy machinery
Machinery for preparing animal feeds
Poultry incubators and brooders
Poultry-keeping machinery
Agricultural, horticultural, forestry or bee-keeping machinery
Parts of poultry-keeping machinery or poultry incubators and brooders
Parts for agricultural, horticultural, forestry or bee-keeping machinery
Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables
Machinery used in the milling industry or for the working of cereals or dried leguminous vegetables, other than farm type machinery
Parts for machinery used in the milling industry or for cleaning, sorting, grading or working of cereals or dried leguminous vegetables
Machinery for the preparation of meat or poultry
Machinery for the preparation of fruits, nuts or vegetables
Machinery for the industrial preparation or manufacture of food or drink
Parts of machinery for the industrial preparation or manufacture of food or drink, other than sugar manufacturing
Machinery for making pulp of fibrous cellulosic material
Machinery for making paper or paperboard
Machinery for finishing paper or paperboard
Bed plates, roll bars and other stock-treating parts of machinery for making pulp of fibrous cellulosic materials
Parts of machinery for making pulp of fibrous cellulosic materials
Parts of machinery for making paper or paperboard
Parts of machinery for finishing paper or paperboard
Machines for making bags, sacks or envelopes of paper pulp, paper or paperboard
Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by molding, of paper pulp, paper or paperboard
Machines for molding articles in paper pulp, paper or paperboard
Machinery for making up paper pulp, paper or paperboard
Parts for machinery used in making up paper pulp, paper or paperboard, including cutting machines
Machinery, apparatus and equipment of heading 8442
Parts of the machinery, apparatus or equipment of subheadings 8442.10 8442.20 and 8442.30
Reel-fed offset printing machinery, double-width newspaper printing presses
Reel-fed offset printing machinery, other than double-width newspaper printing presses
Sheet-fed offset printing machinery, office type (sheet size not exceeding 22 X 36 cm)
Offset printing machinery
Letterpress printing machinery, excluding flexographic printing, reel-fed
Gravure printing machinery
Printing machinery
Machines for uses ancillary to printing
Parts of printer units of subheading 8443.32.10 specified in additional U.S. note 2 to this chapter
Parts and accessories of copying machines; nesoi
Machines for extruding, drawing, texturing or cutting man-made textile materials
Converters of a kind used in metallurgy or in metal foundries
Casting machines, of a kind used in metallurgy or in metal foundries
Parts of converters, ladles, ingot molds and casting machines, of a kind used in metallurgy or in metal foundries
Metal-rolling tube mills
Metal-rolling mills, other than tube mills, hot or combination hot and cold
Metal-rolling mills, other than tube mills, cold
Rolls for metal-rolling mills
Parts for metal-rolling mills, other than rolls
Machine tools operated by laser, for working metal
Machine tools operated by laser, of a kind used solely or principally for manufacture of printed circuits
Machine tools operated by laser
Machine tools operated by light or photon beam processes, for working metal
Machine tools operated by light or photon beam processes, of a kind used solely or principally for the manufacture of printed circuits
Machine tools operated by light or photon beam processes
Machine tools operated by ultrasonic processes, for working metal
Machine tools operated by ultrasonic processes, other than for working metal
Machine tools operated by electro-discharge processes, for working metal
Machine tools operated by electro-discharge processes, other than for working metal
Machine tools operated by plasma arc process, for working metal
Machine tools operated by plasma arc process, other than for working metal
Water-jet cutting machines
Machine tools operated by electro-chemical or ionic-beam processes, for working metal
Machine tools operated by electro-chemical or ionic-beam processes, other than for working metal
Machining centers for working metal
Unit construction machines (single station), for working metal
Multistation transfer machines for working metal
Horizontal lathes (including turning centers) for removing metal, numerically controlled
Horizontal lathes (including turning centers) for removing metal, other than numerically controlled
Vertical turret lathes (including turning centers) for removing metal, numerically controlled
Lathes (including turning centers), other than horizontal or vertical turret lathes, for removing metal, numerically controlled
Vertical turret lathes (including turning centers) for removing metal, other than numerically controlled
Lathes (including turning centers), other than horizontal or vertical turret lathes, for removing metal, other than numerically controlled
Way-type unit head machines for drilling, boring, milling, threading or tapping by removing metal, other than lathes of heading 8458
Drilling machines, numerically controlled
Boring-milling machines, numerically controlled
Boring-milling machines, other than numerically controlled
Boring machines, numerically controlled
Boring machines, not numerically controlled
Milling machines, knee type, numerically controlled
Milling machines, other than knee type, numerically controlled
Milling machines, other than knee type, other than numerically controlled
Other threading or tapping machines, numerically controlled
Other threading or tapping machines nesoi
Flat-surface grinding machines, numerically controlled
Flat-surface grinding machines, not numerically controlled
Centerless grinding machines, numerically controlled
Other cylindrical grinding machines, numerically controlled
Other grinding machines, numerically controlled
Other grinding machines, other than numerically controlled
Sharpening (tool or cutter grinding) machines for working metal or cermets, numerically controlled
Honing or lapping machines for working metal or cermets, numerically controlled
Honing or lapping machines for working metal or cermets, other than numerically controlled
Other machine tools for deburring, polishing or otherwise finishing metal or cermets, numerically controlled
Other machine tools for deburring, polishing or otherwise finishing metal or cermets, other than numerically controlled
Shaping or slotting machines for working by removing metal or cermets, numerically controlled
Shaping or slotting machines for working by removing metal or cermets, other than numerically controlled
Broaching machines for working by removing metal or cermets, numerically controlled
Broaching machines for working by removing metal or cermets, other than numerically controlled
Gear cutting machines for working by removing metal or cermets
Gear grinding or finishing machines for working by removing metal or cermets
Sawing or cutting-off machines for working by removing metal or cermets, numerically controlled
Machine-tools for working by removing metal or cermets, numerically controlled
Machine-tools for working by removing metal or cermets, other than numerically controlled
Forging or die-stamping machines (including presses) and hammers
Bending, folding, straightening or flattening machines (including presses) numerically controlled for working metal or metal carbides
Bending, folding, straightening or flattening machines (including presses) not numerically controlled for working metal or metal carbides
Shearing machines (incl. presses), excl. combined punching & shearing machines, numerically controlled for working metal or metal carbides
Shearing machines (incl. presses), excl. combined punch & shearing machines, nt numerically controlled for working metal or metal carbides
Punch/notch machines (incl. presses), incl. combined punch & shearing machines, numerically controlled for working metal or metal carbides
Punch/notch machines (incl. presses), incl. combined punch & shear machines, not numerically controlled for working metal or metal carbides
Hydraulic presses, numerically controlled
Hydraulic presses, not numerically controlled
Machine tools (including nonhydraulic presses) for working metal or metal carbides, numerically controlled
Machine tools (including nonhydraulic presses) for working metal or metal carbides, not numerically controlled
Draw-benches for bars, tubes, profiles, wire or the like, for working metal or cermets, without removing material
Thread rolling machines for working metal or cermets, without removing material
Machines for working wire of metal or cermets, without removing material
Machine tools for working metal or cermets, without removing material
Grinding or polishing machines for working stone, ceramics, concrete, asbestos- cement or like mineral materials, or glass
Machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass
Machines for working certain hard materials which can carry out different types of machining operations w/o tool change between operations
Planing, milling or molding (by cutting) machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials
Grinding, sanding or polishing machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials
Bending or assembling machines for working wood, cork, bone hard rubber, hard plastics or similar hard materials
Machine tools for working wood, cork, bone, hard rubber, hard plastics and similar hard materials
Tool holders and self-opening dieheads for use solely or principally with machines of headings 8456 to 8465 nesoi
Work holders for machine tools used in cutting gears
Work holders for machine tools other than those used in cutting gears
Dividing heads for use solely or principally for machine tools of headings 8456 to 8465
Special attachments (which are machines) use solely or principally for machines of heading 8456 to 8465 excluding dividing heads
Parts and accessories nesoi, for machines of heading 8464
Cast-iron parts not advanced beyond cleaning and specifically machined, for machines of heading 8465
Parts and accessories nesoi, for machines of heading 8465
Certain parts for water-jet cutting machines
Certain specified parts and accessories of metal working machine tools for cutting gears
Certain specified parts and accessories for machines of heading 8456 to 8461 nesoi
Other cast-iron parts not advanced beyond cleaning and specifically machined, for metalworking machine tools for cutting, etc.
Other parts and accessories of metal working machine tools for cutting gears
Parts & accessories for machines of heading 8456 to 8461 used to make printed circuits or PCAs, parts of heading 8517 or computers
Other parts and accessories for machines of heading 8456 to 8461 nesoi
Certain specified cast-iron parts not advanced beyond cleaning and specifically machined, for machines of heading 8462 or 8463
Other cast-iron parts not advanced beyond cleaning and specifically machined, for machines of heading 8462 or 8463
Other specified parts and accessories for machines of heading 8462 or 8463 nesoi
Other parts and accessories for machines of heading 8462 or 8463
Tools for working in the hand, pneumatic, rotary type, suitable for metal working
Tools for working in the hand, pneumatic, rotary type, other than suitable for metal working
Gas-operated machinery, apparatus and appliances, not hand-directed or -controlled, used for soldering, brazing, welding or tempering
Machinery and apparatus other than hand-directed or -controlled, used for soldering, brazing or welding, not gas-operated
ADP magnetic disk drive storage units, disk dia. ov 21 cm, not entered with the rest of a system
ADP magnetic disk drive storage units, disk dia. n/ov 21 cm, not in cabinet, w/o attached external power supply, n/entered w/rest of a system
ADP storage units other than magnetic disk, not in cabinets for placing on a table, etc., not entered with the rest of a system
ADP storage units other than magnetic disk drive units, not entered with the rest of a system
Parts and accessories of the ADP machines of heading 8471 not incorporating a CRT, parts and accessories of printed circuit assemblies
Printed circuit assemblies for automatic teller machines of subheading 8472.90.10
Other parts and accessories of machines of heading 8472 nesoi
Printed circuit assemblies suitable for use with machines of two or more of the headings 8469 to 8472
Sorting, screening, separating or washing machines for earth, stones, ores or other mineral substances in solid form
Crushing or grinding machines for earth, stones, ores or other mineral substances
Concrete or mortar mixers
Machines for mixing mineral substances with bitumen
Mixing or kneading machines for earth, stones, ores or other mineral substances
Machinery for agglomerating, shaping or molding solid mineral fuels, or other mineral products; machines for forming sand foundry molds
Parts for the machinery of heading 8474
Machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes
Machines for making glass optical fibers and preforms thereof
Parts of machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes
Parts of machines for manufacturing or hot working glass or glassware
Injection-molding machines for manufacturing shoes of rubber or plastics
Injection-molding machines for use in the manufacture of video laser discs
Injection-molding machines of a type used for working or manufacturing products from rubber or plastics
Extruders for working rubber or plastics or for the manufacture of products from these materials
Blow-molding machines for working rubber or plastics or for the manufacture of products from these materials
Vacuum-molding and other thermoforming machines for working rubber or plastics or for manufacture of products from these materials
Machinery for molding or retreading pneumatic tires or for molding or otherwise forming inner tubes
Machinery for working rubber or plastics or for the manufacture of products from these materials
Base, bed, platen and specified parts of machinery for working rubber or plastics or for manufacture of products from these material
Barrel screws of machinery for working rubber or plastics or for the manufacture of products from these materials
Hydraulic assemblies of machinery for working rubber or plastics or for the manufacture of products from these materials
Parts of machinery for working rubber or plastics or for the manufacture of products from these materials
Machinery for public works, building or the like
Machinery for the extraction or preparation of animal or fixed vegetable fats or oils
Presses for making particle board or fiber building board of wood or other ligneous materials, and mach. for treat. wood or cork
Rope- or cable-making machines nesoi
Industrial robots, not elsewhere specified or included
Machines and mechanical appliances for treating metal, including electric wire coil- winders
Machines for mixing, kneading, crushing, grinding, screening, sifting, homogenizing, emulsifying or stirring
Machines for the manufacture of optical media
Automated electronic component placement machines for making printed circuit assemblies
Parts of machines and mechanical appliances having individual functions, not specified or included elsewhere in chapter 84
Mold bases
Molding patterns
Molds for metal or metal carbides, injection or compression types
Molds for metal or metal carbides other than injection or compression types
Molds for glass
Molds for rubber or plastics, injection or compression types, for shoe machinery
Injection or compression type molds for rubber or plastics for the manufacture of semiconductor devices
Molds for rubber or plastics, injection or compression types, other than for shoe machinery or for manufacture of semiconductor devices
Pressure-reducing valves for pipes, boiler shells, tanks, vats or the like
Valves for oleohydraulic or pneumatic transmissions
Check valves of iron or steel for pipes, boiler shells, tanks, vats or the like
Check valves other than of copper or iron or steel, for pipes, boiler shells, tanks, vats or the like
Safety or relief valves for pipes, boiler shells, tanks, vats or the like
Parts of taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like
Ball bearings other than ball bearings with integral shafts
Tapered roller bearings, including cone and tapered roller assemblies
Spherical roller bearings
Needle roller bearings
Cylindrical roller bearings nesoi
Ball or roller bearings nesoi, including combined ball/roller bearings
Balls, needles and rollers for ball or roller bearings
Inner or outer rings or races for ball bearings
Inner or outer rings or races for taper roller bearings
Inner or outer rings or races for other bearings
Parts of ball bearings (including parts of ball bearings with integral shafts)
Parts of tapered roller bearings
Parts of other ball or roller bearings
Bearing housings of the flange, take-up, cartridge and hanger unit type
Torque converters
Fixed, multiple and variable ratio speed changers, imported for use with machines for making cellulosic pulp, paper or paperboard
Ball or roller screws
Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately
Flywheels
Pulleys, including pulley blocks
Clutches and universal joints
Chain sprockets and parts thereof
Parts of flange, take-up, cartridge and hanger units
Parts of bearing housings and plain shaft bearings
Parts of articles of subheading 8483.20
Parts of transmission equipment
Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal
Mechanical seals
Sets or assortments of gaskets and similar joints dissimilar in composition, put up in pouches, envelopes or similar packings
Ships' or boats propellers and blades therefor
Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features and other parts nesoi
Electric motors of an output of under 18.65 W, other than synchronous valued not over $4 each
Universal AC/DC motors of an output exceeding 37.5 W but not exceeding 74.6 W
Universal AC/DC motors of an output exceeding 735 W but under 746 W
Universal AC/DC motors of an output of 746 W or more
DC motors nesoi, of an output exceeding 37.5 W but not exceeding 74.6 W
DC motors, of an output exceeding 735 W but under 746 W
DC motors nesoi, of an output of 746 W but not exceeding 750 W
DC motors nesoi, of an output exceeding 14.92 kW but not exceeding 75 kW, used as primary source of mechanical power for electric vehicles
DC motors nesoi, of an output exceeding 14.92 kW but not exceeding 75 kW
DC motors nesoi, of an output exceeding 150 kW but not exceeding 375 kW
DC generators of an output exceeding 75 kW but not exceeding 375 kW
DC motors nesoi, of an output exceeding 375 kW
DC generators of an output exceeding 375 kW
AC motors nesoi, multi-phase, of an output exceeding 37.5 W but not exceeding 74.6 W
AC motors, multi-phase, of an output exceeding 74.6 W but not exceeding 735 W
AC motors, multi-phase, of an output exceeding 735 W but under 746 W
AC motors nesoi, multi-phase of an output of 746 W but not exceeding 750 W
AC motors nesoi, multi-phase, of an output exceeding 14.92 kW but not exceeding 75 kW
AC motors nesoi, multi-phase, of an output exceeding 75 kW but under 149.2 kW
AC motors nesoi, multi-phase, of an output exceeding 150 kW
AC generators (alternators) of an output exceeding 75 kVA but not exceeding 375 kVA
AC generators (alternators) of an output exceeding 375 kVA but not exceeding 750 kVA
AC generators (alternators) of an output exceeding 750 kVA
Electric generating sets with compression-ignition internal-combustion piston engines, of an output not exceeding 75 kVA
Electric generating sets with compression-ignition internal-combustion piston engines, of an output exceeding 75 kVA but not over 375 kVA
Electric generating sets with compression-ignition internal-combustion piston engines, of an output exceeding 375 kVA
Wind-powered electric generating sets
Electric generating sets
Electric rotary converters
Commutators suitable for use solely or principally with the machines of heading 8501 or 8502
Parts of electric motors under 18.65 W, stators and rotors
Stators and rotors for electric generators for use on aircraft
Stators and rotors for electric motors & generators of heading 8501 nesoi
Parts of electric motors under 18.65 W, other than commutators, stators or rotors
Parts for electric generators suitable for use on aircraft
Liquid dielectric transformers having a power handling capacity not exceeding 650 kVA
Liquid dielectric transformers having a power handling capacity exceeding 650 kVA but not exceeding 10000 kVA
Liquid dielectric transformers having a power handling capacity exceeding 10000 kVA
Electrical transformers other than liquid dielectric, having a power handling capacity exceeding 1 kVA but not exceeding 16 kVA
Electrical transformers other than liquid dielectric, having a power handling capacity exceeding 16 kVA but not exceeding 500 kVA
Electrical transformers other than liquid dielectric, having a power handling capacity exceeding 500 kVA
Electrical speed drive controllers for electric motors (static converters)
Parts of power supplies (other than printed circuit assemblies) for automatic data processing machines or units thereof of heading 8471
Printed circuit assemblies of the goods of subheading 8504.40 or 8504.50 for telecommunication apparatus
Printed circuit assemblies of electrical transformers, static converters and inductors
Parts (other than printed circuit assemblies) of electrical transformers, static converters and inductors
Flexible permanent magnets, other than of metal
Electromagnetic couplings, clutches and brakes
Electromagnetic lifting heads
Electromagnetic or permanent magnet work holders and parts thereof
Electromagnets used for MRI
Other electromagnets and parts thereof, and parts of related electromagnetic articles nesoi
Silver oxide primary cells and primary batteries having an external volume not exceeding 300 cubic cm
Silver oxide primary cells and primary batteries having an external volume exceeding 300 cubic cm
Lithium primary cells and primary batteries
Air-zinc primary cells and primary batteries
Parts of primary cells and primary batteries
Parts of storage batteries, including separators therefor, other than parts of lead-acid storage batteries
Resistance heated industrial or laboratory furnaces and ovens
Industrial or laboratory microwave ovens
Industrial or laboratory furnaces and ovens (other than microwave) functioning by induction or dielectric loss
Industrial furnaces and ovens for making printed circuits or printed circuit assemblies
Industrial or laboratory electric industrial or laboratory furnaces and ovens nesoi
Industrial or laboratory induction or dielectric heating equipment nesoi
Parts of industrial or laboratory electric furnaces and ovens and other industrial or laboratory induction or dielectric heating equipment
Electric soldering irons and guns
Electric brazing or soldering machines and apparatus, other than soldering irons and guns
Electric machines and apparatus for resistance welding of metal, fully or partly automatic
Electric machines and apparatus for resistance welding of metal, other than fully or partly automatic
Electric machines and apparatus for arc (including plasma arc) welding of metals, fully or partly automatic
Electric machines and apparatus for arc (including plasma arc) welding of metals, other than fully or partly automatic
Electric welding apparatus nesoi, and electric machines and apparatus for hot spraying metals or sintered metal carbides
Parts of electric welding machines and apparatus
Parts of electric soldering or brazing machines & apparatus, & electric apparatus for hot spraying of metals or sintered metal carbides
Transmission apparatus for radiobroadcasting
Transceivers
Transmission apparatus incorporating reception apparatus, other than transceivers
Television cameras, gyrostabilized
Television cameras, studio type, other than shoulder-carried or other portable cameras
Radar apparatus
Radio navigational aid apparatus, other than radar
Radio remote control apparatus other than for video game consoles
Radio receivers
Reception apparatus for radiobroadcasting
Radar, radio navigational aid and radio remote control antennas and antenna reflectors, and parts suitable for use therewith
PCBs and ceramic substrates and subassemblies thereof, for color TV, with components listed in add. US note 4 chap. 85
PCBs and ceramic substrates and subassemblies thereof, for color TV, not with components listed in add. US note 4 chap. 85
Printed circuit assemblies for television cameras
Printed circuit assemblies which are subassemblies of radar, radio nav. aid or remote control apparatus, of 2 or more parts joined together
Printed circuit assemblies, for radar, radio navigational aid or radio remote control apparatus
Other printed circuit assemblies suitable for use solely or principally with the apparatus of headings 8525 to 8528 nesoi
Transceiver assemblies for the apparatus of subheading 8526.10 other than printed circuit assemblies
Tuners for television apparatus, other than printed circuit assemblies
Subassies w/2 or more PCBs or ceramic substrates, as spec'd in add. US note 9 ch. 85 for color TV, w/components in add. US note 4, ch.85
Combinations of PCBs and ceramic substrates and subassemblies thereof for color TV, w/components listed in add. U.S. note 4, chap. 85
Parts of printed circuit assemblies (including face plates and lock latches) for television cameras
Parts of printed circuit assemblies (including face plates and lock latches) for television apparatus other than television cameras
Parts of printed circuit assemblies (including face plates and lock latches) for radar, radio navigational aid or radio remote control app.
Mounted lenses for use in closed circuit television cameras, separately imported, w/ or w/o attached elec. Connectors or motors
Other parts of television cameras
Other parts of television apparatus (other than television cameras)
Subassies w/2 or more PCBs or ceramic substrates, exc. tuners or converg. ass'ies, for color TV, not w/components in add. US note 4, ch. 85
Parts of television apparatus
Assemblies and subassemblies of radar, radio navigational aid or remote control apparatus, of 2 or more parts joined together
Parts suitable for use solely or principally in radar, radio navigational aid or radio remote control apparatus
Parts suitable for use solely or principally with the apparatus of headings 8525 to 8528
Electrical signaling, safety or traffic control equipment for railways, streetcar lines or subways
Electrical signaling, safety or traffic control equipment for roads, inland waterways, parking facilities, port installations or airfields
Parts for electrical signaling, safety or traffic control equipment
Fixed electrical capacitors designed for use in 50/60 Hz circuits and having a reactive power handling capacity of not less than 0.5 kvar
Tantalum fixed capacitors
Aluminum electrolytic fixed capacitors
Ceramic dielectric fixed capacitors, single layer
Ceramic dielectric fixed capacitors, multilayer
Dielectric fixed capacitors of paper or plastics
Fixed electrical capacitors
Variable or adjustable (pre-set) electrical capacitors
Parts of electrical capacitors, fixed, variable or adjustable (pre-set)
Electrical fixed carbon resistors, composition or film types
Electrical fixed resistors, other than composition or film type carbon resistors, for a power handling capacity not exceeding 20 W
Electrical fixed resistors, other than composition or film type carbon resistors, for a power handling capacity exceeding 20 W
Electrical wirewound variable resistors, including rheostats and potentiometers, for a power handling capacity not exceeding 20 W
Metal oxide resistors
Electrical variable resistors, other than wirewound, including rheostats and potentiometers
Other parts of electrical resistors, including rheostats and potentiometers
Fuses, for a voltage exceeding 1000 V
Automatic circuit breakers, for a voltage of less than 72.5 kV, but exceeding 1000 V
Automatic circuit breakers, for a voltage of 72.5 kV or more
Isolating switches and make-and-break switches, for a voltage exceeding 1
Electrical motor starters and electrical motor overload protector, for a voltage exceeding 1000 V
Electrical apparatus nesoi for switching, protecting, or making connections for electrical circuits, for a voltage exceeding 1000 V
Fuses, for a voltage not exceeding 1000 V
Automatic circuit breakers, for a voltage not exceeding 1000 V
Electrical motor overload protectors, for a voltage not exceeding 1000 V
Relays for switching, protecting or making connections to or in electrical circuits, for a voltage not exceeding 60 V
Relays for switching, protecting or making connections to or in electrical circuits, for a voltage exceeding 60 but not exceeding 1000 V
Electrical motor starters (which are switches), for a voltage not exceeding 1000 V
Switches nesoi, for switching or making connections to or in electrical circuits, for a voltage not exceeding 1000 V
Connectors: coaxial, cylindrical multicontact, rack and panel, printed circuit, ribbon or flat cable, for a voltage not exceeding 1000 V
Electrical terminals, electrical splicers and electrical couplings, wafer probers, for a voltage not exceeding 1000 V
Other electrical apparatus nesoi, for switching or making connections to or in electrical circuits, for a voltage not exceeding 1000 V
Boards, panels, etc., equipped with apparatus for electric control, for a voltage not exceeding 10 motor control centers
Touch screens without display capabilities for incorporation in apparatus having a display
Boards, panels, consoles, desks, cabinets and other bases, equipped with apparatus for electric control, for a voltage exceeding 1,000 V
Parts of boards, panels, consoles, desks, cabinets and other bases for the goods of heading 8537, not equipped with their apparatus
Parts for articles of 8535.90.40, 8536.30.40 or 8536.50.40, of ceramic or metallic materials, mech. or elec. reactive to changes in temp.
Molded parts nesoi, suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537
Other parts nesoi, suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537
Arc lamps
Parts of electrical filament or discharge lamps
Klystron tubes
Microwave tubes (other than magnetrons or klystrons) excluding grid-controlled tubes
Thermionic, cold cathode or photocathode tubes
Transistors, other than photosensitive transistors, with a dissipation rating of less than 1 W
Transistors, other than photosensitive transistors, with a dissipation rating of 1 W or more
Thyristors, diacs and triacs, other than photosensitive devices
Light-emitting diodes (LED's)
Photosensitive transistors
Photosensitive semiconductor devices nesoi, optical coupled isolators
Photosensitive semiconductor devices nesoi, other
Semiconductor devices other than photosensitive semiconductor devices
Mounted piezoelectric crystals
Parts of diodes, transistors, similar semiconductor devices, photosensitive semiconductor devices, LED's and mounted piezoelectric crystals
Electrical particle accelerators
Electrical signal generators
Electrical machines and apparatus for electroplating, electrolysis, or electrophoresis for making printed circuits
Other electrical machines and apparatus for electroplating, electrolysis, or electrophoresis
Physical vapor deposition apparatus
Flight data recorders
Electrical machines and apparatus nesoi, designed for connection to telegraphic or telephonic apparatus, instruments or networks
Microwave amplifiers
Touch screens without display capabilities for incorporation in apparatus having a display
Plasma cleaner machines that remove organic contaminants from electron microscopy specimens and holders
Parts of physical vapor deposition apparatus of subheading 8543.70
Assemblies and subassemblies for flight data recorders, consisting of 2 or more parts pieces fastened together, printed circuit assemblies
Assemblies and subassemblies for flight data recorders, consisting of 2 or more parts pieces fastened together, not printed circuit assys.
Printed circuit assemblies of flat panel displays other than for reception apparatus for television of heading 8528
Printed circuit assemblies of electrical machines and apparatus, having individual functions
Insulated (including enameled or anodized) winding wire, of copper
Insulated (including enameled or anodized) winding wire, other than of copper
Insulated ignition wiring sets and other wiring sets of a kind used in vehicles, aircraft or ships
Insulated electric conductors nesoi, of copper, for a voltage not exceeding 1,000 V, not fitted with connectors
Insulated electric conductors nesoi, not of copper, for a voltage not exceeding 1,000 V, not fitted with connectors
Insulated electric conductors nesoi, for a voltage exceeding 1,000 V, fitted with connectors
Insulated electric conductors nesoi, of copper, for a voltage exceeding 1,000 V, not fitted with connectors
Optical fiber cables made up of individually sheathed fibers
Rail locomotives powered from an external source of electricity
Self-propelled railway or tramway coaches, vans and trucks (o/than those of 8604), powered from an external source of electricity
Self-propelled railway or tramway coaches, vans and trucks (o/than those of 8604), o/than powered from an external source of electricity
Railway or tramway maintenance or service vehicles, whether or not self-propelled
Parts of railway/tramway locomotives/rolling stock, truck assemblies for other than self-propelled vehicles
Parts of railway/tramway locomotives/rolling stock, parts of axles
Parts of railway/tramway locomotives/rolling stock, wheels, whether or not fitted with axles
Parts of railway/tramway locomotives/rolling stock, parts of wheels
Parts of railway/tramway locomotives/rolling stock, parts of truck assemblies for self- propelled vehicles or for non-self-propelled nesoi
Parts of railway/tramway locomotives/rolling stock, air brakes & parts thereof for non-self-propelled passenger coaches or freight cars
Parts of railway/tramway locomotives/rolling stock, air brakes & parts thereof for self- propelled vehicles or non-self-propelled stock nesoi
Parts of railway/tramway locomotives/rolling stock, pts of brakes (o/than air brakes) for non-self-propelled passenger coaches or freight
Parts of railway/tramway locomotives/rolling stock, pts of brakes (o/th air brakes) for self-propelled vehicles or non-self-propelled nesoi
Parts, of railway/tramway locomotives
Parts (o/than brake regulators) nesoi, of railway/tramway, non-self-propelled passenger coaches or freight cars
Parts, of railway or tramway rolling stock
Railway or tramway track fixtures and fittings; mechanical signaling, safety or traffic control equipment of all kinds nesoi; parts thereof
Single axle tractors, other than tractors of 8709
Track-laying tractors, suitable for agricultural use
Motor vehicles w/diesel engine, to transport 16 or more persons, incl driver
Motor vehicles w/diesel engine, to transport 10 to 15 persons, incl driver
Motor vehicles w/diesel engine & electric motor, to transport 16 or more persons, incl driver
Motor vehicles w/diesel engine & electric motor, to transport 10 to 15 persons, incl driver
Motor vehicles w/spark-ign. IC recip. piston engine & electric motor, to transport 16 or more persons, incl driver
Motor vehicles w/spark-ign. IC recip. piston engine & electric motor, to transport 10 to 15 persons, incl driver
Motor vehicles w/electric motor, to transport 16 or more persons, incl driver
Motor vehicles w/electric motor, to transport 10 to 15 persons, incl driver
Motor vehicles nesoi, to transport 16 or more persons, incl driver
Motor vehicles nesoi, to transport 10 to 15 persons, incl driver
Motor vehicles to transport persons, w/spark-ign. IC recip. piston engine, w/cyl capacity <= 1, 000 cc
Motor vehicles to transport persons, w/spark-ign. IC recip. piston engine, w/cyl capacity > 1, 000cc but <=1,500cc
Motor vehicles to transport persons, w/spark-ign. IC recip. piston engine, w/cyl capacity >1, 500cc but <=3,000cc
Motor vehicles to transport persons, w/spark-ign. IC recip. piston engine, w/cyl capacity >3, 000cc
Motor vehicles to transport persons, w/diesel engines, of a cylinder capacity <= 1,500cc
Motor vehicles to transport persons, w/diesel engines, of a cylinder capacity > 1,500cc but <= 2,500cc
Motor vehicles to transport persons, w/diesel engines, of a cylinder capacity > 2, 500cc
Motor vehicles to transport persons, w/spark-ign. IC recip. piston engine & elec motor incapable of charge by plug to external source
Motor vehicles to transport persons, w/diesel engine & elec motor incapable of charge by plug to external source
Motor vehicles to transport persons, w/spark-ign. IC recip. piston engine & elec motor capable of charge by plug to external source
Motor vehicles to transport persons, w/diesel engine & elec motor capable of charge by plug to external source
Motor vehicles to transport persons, w/electric motor for propulsion
Motor vehicles to transport persons
Mtr. vehicles for transport of goods, cab chassis for dumpers designed for off-highway use
Mtr. vehicles for transport of goods, complete dumpers designed for off-highway use
Mtr. vehicles for transport of goods, w/compress.-ign. int. combust. recip. piston engine, w/G.V.W. not over 5 metric tons
Mtr. vehicles for transport of goods, cab chassis, w/compress.-ign. int. combust. recip. piston engine, w/G.V.W. o/5 but n/o 20 metric tons
Mtr. vehicl. for transport of goods (o/than cab chassis), w/compress.-ign. int. combust. recip. piston engine, w/G.V.W. o/5 but n/o 20 mtons
Mtr. vehicles for transport of goods, w/compress.-ign. int. combust. recip. piston engine, w/G.V.W. over 20 metric tons
Mtr. vehicles for transport of goods, w/spark.-ign. int. combust. recip. piston engine, w/G.V.W. not over 5 metric tons
Mtr. vehicles for transport of goods, w/spark.-ign. int. combust. recip. piston engine, w/G.V.W. over 5 metric tons
Mtr. vehicles (o/than for transport of persons or of goods), fire fighting vehicles
Mtr. vehicles (o/than for transport of persons or of goods), concrete mixers
Chassis fitted w/engines, for mtr. vehicles of heading 8705
Chassis fitted w/engines, for tractors suitable for agricultural use
Electrical, self-propelled, works trucks, not fitted w/lift. equip. and tractors of type used on railway station platforms
Non-electrical, self-propelled, works trucks, not fitted w/lift. equip. and tractors of type used on railway station platforms
Parts of self-propelled works trucks, not fitted w/lift. equip. and tractors of the type used on railway station platforms
Motorcycles (incl. mopeds) and cycles, fitted w/recip. internal-combustion piston engine w/capacity o/800 cc
Helicopters, with an unladen weight not over 2,000 kg
Helicopters, with an unladen weight over 2,000 kg
Airplanes and other powered aircraft, with an unladen weight not over 2,000 kg
Airplanes and other powered aircraft, with an unladen weight over 2,000 kg but not over 15,000 kg
Airplanes and other powered aircraft, with an unladen weight over 15,000 kg
Communication satellites
Spacecraft, including satellites (o/than communication satellites), and suborbital and spacecraft launch vehicles
Parts of airplanes and other aircraft, propellers and rotors and parts thereof
Parts of airplanes and other aircraft, undercarriages and parts thereof
Parts of airplanes and helicopters
Parts of communication satellites
Parts of aircraft (o/than airplanes and helicopters), spacecraft (o/than comm. satell.) and suborbital and launch vehicles
Aircraft launching gear and parts thereof; deck-arrestors or similar gear and parts thereof
Air combat ground flying simulators and parts thereof
Ground flying trainers and parts thereof, other than air combat simulators
Vessels, designed for the transport of persons, cruise ships, excursion boats and similar vessels; ferry boats of all kinds
Vessels, designed for the transport of goods, tankers
Vessels, designed for the transport of goods or for the transport of both persons and goods
Vessels, fishing; factory ships and other vessels for processing or preserving fishery products
Vessels, tugs and pusher craft
Vessels, dredgers
Floating or submersible drilling or production platforms
Vessels, light-vessels, fire-floats, floating cranes, & other vessels nesoi, the navigability of which is subsidiary to their main function
Vessels (including lifeboats other than row boats)
Vessels and other floating structures for breaking up (scrapping)
Prisms, mounted, for optical uses
Mirrors, mounted, for optical uses
Half-tone screens, mounted, designed for use in engraving or photographic processes
Mounted optical elements; parts and accessories of mounted optical elements
Stereoscopic microscopes, provided with a means for photographing the image
Stereoscopic microscopes, other than those provided with a means for photographing the image
Microscopes for microphotography, microcinematography or microprojection, provided with a means for photographing the image
Parts and accessories for compound optical microscopes, including those for microphotography, microcinematography or microprojection
Microscopes other than optical microscopes; diffraction apparatus
Parts and accessories for microscopes other than optical microscopes, and for diffraction apparatus
Telescopes as parts of machines, appliances, etc. of chapter 90 or section XVI
Lasers, other than laser diodes
Liquid crystal and other optical flat panel displays other than for articles of heading 8528
Electrical direction finding compasses
Optical instruments and appliances (other than compasses) for aeronautical or space navigation
Automatic pilots for aeronautical or space navigation
Electrical instruments and appliances (other than compasses) for aeronautical or space navigation
Nonelectrical instruments and appliances (other than compasses) for aeronautical or space navigation
Optical navigational instruments
Ships' logs and depth-sounding apparatus
Electrical navigational instruments and appliances
Nonelectrical navigational instruments and appliances
Parts and accessories of automatic pilots for aeronautical or space navigation of subheading 9014.20.40
Parts and accessories of nonelectrical instruments and appliances for aeronautical or space navigation of subheading 9014.20.80
Parts and accessories of nonelectrical navigational instruments and appliances nesoi of subheading 9014.80.50
Parts and accessories of navigational instruments and appliances
Rangefinders, other than electrical
Electrical theodolites and tachymeters
Theodolites and tachymeters, other than electrical
Electrical photogrammetrical surveying instruments and appliances
Photogrammetrical surveying instruments and appliances, other than electrical
Optical surveying, hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances
Seismographs
Surveying, hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, nonoptical
Electrocardiographs
Printed circuit assemblies for electrocardiographs
Parts and accessories of electrocardiographs, other than printed circuit assemblies
Ultrasonic scanning electro-diagnostic apparatus used in medical, surgical, dental or veterinary sciences
Magnetic resonance imaging electro-diagnostic apparatus used in medical, surgical, dental or veterinary sciences
Scintigraphic electro-diagnostic apparatus used in medical, surgical, dental or veterinary sciences
Electro-diagnostic apparatus for functional exploratory examination, and parts and accessories thereof
Electro-diagnostic patient monitoring systems
Printed circuit assemblies for electro-diagnostic parameter acquisition modules
Electro-diagnostic apparatus nesoi, and parts and accessories thereof nesoi
Ultraviolet or infrared ray apparatus used in medical, surgical, dental or veterinary sciences, and parts and accessories thereof
Optical instruments and appliances nesoi, used in medical, surgical, dental or veterinary sciences, and parts and accessories thereof
Anesthetic instruments and appliances nesoi, used in medical, surgical, dental or veterinary sciences, and parts and accessories thereof
Electro-surgical instruments and appliances nesoi, other than extracorporeal shock wave lithotripters and parts and accessories thereof
Electro-medical instruments and appliances nesoi, and parts and accessories thereof
Pacemakers for stimulating heart muscles, excluding parts and accessories thereof
Computed tomography apparatus based on the use of X-rays
Apparatus based on the use of X-rays for dental uses (other than computed tomography apparatus)
Apparatus based on the use of X-rays for medical, surgical or veterinary uses (other than computed tomography apparatus)
Apparatus based on the use of X-rays other than for medical, surgical, dental or veterinary use
Apparatus based on the use of alpha, beta or gamma radiations, for medical, surgical, dental or veterinary use
Apparatus based on the use of alpha, beta or gamma radiations, other than for medical, surgical, dental or veterinary use
X-ray tubes
Radiation generator units
Radiation beam delivery units
X-ray generators, high tension generators, desks, screens, examination or treatment tables, chairs and similar apparatus
Parts and accessories of X-ray tubes
Parts and accessories of apparatus based on the use of X-rays
Parts and accessories of apparatus based on the use of alpha, beta or gamma radiations
Machines and appliances for testing the mechanical properties of metals
Machines and appliances for testing the mechanical properties of materials other than metals
Parts and accessories of machines and appliances for testing the hardness, strength, compressibility, or other properties of materials
Electrical instruments and apparatus for measuring or checking the flow or level of liquids
Electrical instruments and apparatus for measuring or checking the pressure of liquids or gases
Electrical instruments and apparatus for measuring or checking variables of liquids or gases
Parts and accessories of electrical instruments and apparatus for measuring or checking variables of liquids or gases
Parts and accessories of nonelectrical flow meters, heat meters incorporating liquid supply meters and anemometers
Parts and accessories of nonelectrical instruments and apparatus for measuring or checking variables of liquids or gases
Electrical chromatographs and electrical electrophoresis instruments
Nonelectrical chromatographs
Electrical spectrometers, spectrophotometers and spectrographs using optical radiations (ultraviolet, visible, infrared)
Nonelectrical spectrometers, spectrophotometers and spectrographs using optical radiations (ultraviolet, visible, infrared)
Exposure meters
Electrical instruments and apparatus using optical radiations (ultraviolet, visible, infrared)
Nonelectrical instruments and apparatus using optical radiations (ultraviolet, visible, infrared)
Nuclear magnetic resonance instruments
Electrical instruments and apparatus for physical or chemical analysis, measuring viscosity, checking heat, sound, light, etc.
Nonelectrical instruments and apparatus for physical or chemical analysis, measuring viscosity, checking heat, sound or light
Printed circuit assemblies for instruments and apparatus of subheading 9027.80
Parts and accessories of electrophoresis instruments not incorporating an optical or other measuring device
Parts and accessories of electrical instruments and apparatus of subheading 9027.20, 9027.30, 9027.50 or 9027.80
Other parts and accessories of other electrical instruments and apparatus of heading 9027
Parts and accessories of nonelectrical optical instruments and apparatus of subheading 9027.20, 9027.3, 9027.4, 9027.50 or 9027.80
Parts and accessories of nonelectrical nonoptical instruments and apparatus of heading 9027.20, 9027.3, 9027.4, 9027.50 or 9027.80
Parts and accessories of nonelectrical instruments and apparatus of heading 9027
Parts and accessories for gas, liquid or electricity supply or production meters
Instruments and apparatus for measuring or detecting ionizing radiations
Oscilloscopes and oscillographs, specially designed for telecommunications
Resistance measuring instruments
Other instruments and apparatus, for measuring or checking electrical voltage, current, resistance or power, without a recording device
Instruments and apparatus, for measuring or checking electrical voltage, current, resistance or power, with a recording device
Instruments and apparatus specially designed for telecommunications
Instruments and apparatus for measuring or checking electrical quantities: for measuring or checking semiconductor wafers or devices
Printed circuit assemblies for instruments and apparatus for measuring or detecting ionizing radiation
Parts and accessories for instruments and apparatus for measuring or detecting ionizing radiation
Printed circuit assemblies for subheadings and apparatus of 9030.40 & 9030.82
Printed circuit assemblies
Parts and accessories for instruments and apparatus for measuring or checking semiconductor wafers or devices
Parts and accessories for articles of subheadings 9030.20 to 9030.40, 9030.83 and 9030.89 nesoi
Machines for balancing mechanical parts
Test benches
Optical measuring/checking instruments/appliances for inspecting semiconductor wafers/devices or photomasks/reticle used to mfg such devices
Profile projectors
Optical coordinate-measuring machines
Optical instrument & appliance: to inspect masks (not photomask) used to mfg semiconductor devices; to measure contamination on such devices
Other optical measuring or checking instruments, appliances and machines
Electron beam microscopes fitted with equipment specifically designed for the handling and transport of semiconductor devices or reticles
Measuring and checking instruments, appliances and machines
Parts and accessories of profile projectors
Parts & accessories of measuring & checking optical instruments & appliances of subheading 9031.41 or 9031.49.70
Parts & accessories of measuring & checking optical instruments & appliances, other than test benches or profile projectors
Parts and accessories of articles of subheading 9031.80.40
Parts and accessories of measuring or checking instruments, appliances and machines
Automatic thermostats
Automatic manostats
Hydraulic and pneumatic automatic regulating or controlling instruments and apparatus
Automatic voltage and voltage-current regulators, designed for use in a 6, 12, or 24 V system
Automatic voltage and voltage-current regulators, not designed for use in a 6, 12, or 24 V system
Automatic regulating or controlling instruments and apparatus
Parts and accessories of automatic voltage and voltage-current regulators designed for use in a 6, 12, or 24 V system
Parts and accessories of automatic voltage and voltage-current regulators, not designed for use in a 6, 12, or 24 V system
Parts and accessories for automatic regulating or controlling instruments and apparatus
LEDs for backlighting of LCDs
Touch screens without display capabilities for incorporation in apparatus having a display
Other parts and accessories for machines, appliances, instruments or apparatus of chapter 90

Because Beijing is unhappy with Washington, China will punish the people and companies in China that buy the following things from the USA:

Fruits and nuts
Fresh apricot _ _ Fresh sour cherries _ _ Other fresh cherries
Peach, including fresh nectarine _ _ Fresh plum and plum
Fresh strawberries _ _ Fresh raspberry, blackberry, mulberry and roganberry
Fresh currant and gooseberry _ _ Fresh Cranberries and Bilberries
Kiwifruit _ _ Fresh Durian _ _ Persimmon _ _ Fresh Litchi _ _ Fresh Longan
Bright red Maodan _ _ Fresh Litchi _ _ Fresh Carambola _ _ Fresh lotus fog
Fresh Pitaya _ _ dried apricots _ _ Mei Qiang and Li Gan
Dried apples _ _ Dried longan and meat _ _ Dried persimmons _ _ Dried red dates
Dried Litchi _ _ Assorted nuts or dried fruits

Grain
Durum wheat _ _ Wheat and mixed wheat _ _ Corn
Use of glutinous rice paddy _ _ Paddy rice _ _ Coarse Brown Rice
Polished rice _ _ Broken rice _ _ Other broken rice _ _ Fine corn powder
Sticky Rice Fine Powder _ _ Glutinous Rice Coarse Grain and Coarse Rice
Yellow Soybean _ _ Black soybean _ _ Aromatic meal and pellets
Rutabaga, fodder beet and other plant feeds _ _ Cotton linters

Meats
Fine and juice of meat and aquatic products _ _ Atlantic salmon
Carp _ _ Sardine _ _ Tuna _ _ Eel, _ _ Cod _ _ Carp
Shark fins, manufactured or preserved _ _ Canned shark fins
Tilapia _ _ Catfish, _ _ Other shadtail cod
Salmon caviar _ _ Snapper Caviar Substitute
Crabs, _ _ Shrimp and shrimp, in non-hermetic packaging
Other shrimp and shrimp _ _ Lobsters, _ _ Freshwater crayfish
Oysters, _ _ Scallops, , including sea fan _ _ Mussels,
Cuttlefish and mackerel, _ _ Octopus Cockles and boats
Abalones, _ _ Snails and snails, , other than conch shells
Sea cucumbers, _ _ Sea urchins, _ _ Sea oysters,

Beverages
Cranberries Made Without Vinegar _ _ Frozen orange juice
Non-frozen orange juice with Brix not exceeding 20
Modified ethanol and other alcohols of any concentration
Whiskey

Tobacco
Flue-cured tobacco partially Partially or totally deterred tobacco
Tobacco waste _ _ Tobacco Cigars _ _ Cigarettes made of tobacco
Cigars and cigarettes made of tobacco substitutes
Homogenized or "reconstituted" tobacco
Articles made of other tobacco and tobacco substitutes; tobacco essence

Uncombed cotton

Vehicles
Off-road vehicles and passenger cars, 1.5L or larger displacement
Hybrid Electric SUVs , 1.5L or larger displacement
Hybrid Electric Vehicles with Lit Engines (pluggable)
Hybrid Electric Vehicle with Compression Ignition Engine (pluggable)
Electric vehicles
Trucks with a spark-ignition engine, vehicle weight <= 5 tons
Gearboxes and their parts, not elsewhere specified for motor vehicles

Fuel
Unformed anthracite _ _ Unformed coking bituminous coal
Briquettes and similar solid fuels _ _ Lignite
Peat _ _ Coke and Semi-Coke _ _ Charcoal
Gas, water, gas and similar gases _ _ Coal tar and other mineral tar
Crude Benzene _ _ Crude Toluene _ _ Crude xylene
Naphthalene _ _ Creosote _ _ Phenol
Asphalt tar _ _ Asphalt coke made from tar _ _ Crude oil
Vehicle Gasoline and Aviation Gasoline _ _ Naphtha
Rubber Solvent Oil, Paint Solvent Oil, Extraction Solvent Oil
Terpenes _ _ Other light oil fractions _ _ Aviation kerosene
Lamp kerosene _ _ Fuel Oil No. 5-7 _ _ Diesel
Lubricants _ _ Grease _ _ Lubricant Base Oil
Liquid paraffin and heavy liquid paraffin _ _ Other heavy oil and heavy oil products
PCBs, PCTs, or PBBs Waste oil
Liquefied Propane _ _ Liquefied butane filling cigarette lighters
Liquefied ethylene, propylene, butanes and butadiene
Other LPG and Hydrocarbon Gases _ _ Gaseous Natural Gas
Gaseous petroleum gas and other hydrocarbon gases _ _ Vaseline
Paraffin wax _ _ Microcrystalline wax
Uncalcined petroleum coke _ _ Petroleum asphalt
Asphalt shale, oil shale and tar sands _ _ Natural Asphalt (Asphalt)
Emulsified asphalt _ _ Asphalt rock _ _ 1,2-Dichloroethane (ISO)
Acrylonitrile _ _ Non-ionic organic surfactants
Mineral oil <70% lubricant _ _ Lubricants extracted from bituminous minerals
Adhesives based on other rubber or plastics
Supported catalysts based on noble metals and their compounds as actives
Reaction Initiators, Reaction Promoters, Catalysts
Diagnostic or experimental reagents
Contains aldrin, toxaphene, chlordane, chlordecone, DDT _ _ Contains 1,2,3,4,5,6-HCH[6]
Mainly from (5-ethyl-2-methyl-2-oxo-1,3,2-dioxaphosphorin-5-yl) Dimethyl Methyl Phosphonate and Bis[(5-Ethyl-2-methyl-2-oxo-1,3,2-dioxine) Phosphine-5-yl) methyl]methyl phosphonate (FRC-1) Mixtures and products
Polyethylene with a primary shape specific gravity < 0.94
Ethylene-α-olefin copolymers, specific gravity less than 0.94
Primary vinyl polymers _ _ Primary shapes of pure polyvinyl chloride
Primary shapes of acrylic polymers _ _ Primary-shaped polyethers
Primary Shaped Epoxy Resin _ _ Primary Shaped Polycarbonate
Polyamide-6,6 Sections _ _ Aromatic polyamides and their copolymers
Semi-aromatic polyamides and their copolymers _ _ polyamides of primary shape
Polysiloxane of primary shape _ _ primary polysulfides, polysulfones
Primary Shaped, Unplasticized Cellulose Acetate
Self-adhesive plastic plates, sheets, films and other materials
Vinyl polymer plates, sheets, films, foils, etc.
Polyethylene Terephthalate Plate Film Foil Strips _ _ Plastic non-foam plastic sheets
Plastic plates, sheets, films, foil and strips_ _ Halogenated butyl rubber sheets, sheets, strips

Equipment
Magnetic Resonance Imaging Kit _ _ Patient Monitor
Ophthalmology apparatus and instruments
Medical, surgical or veterinary instruments and apparatus

 

[antimony]

As I have been saying, the right way to deal with Trump and family is through bribery and corruption. The Western governments need to wake up to this and start offering him prime land deals for his real estate development and/ or kickbacks, all the while massaging his ego. The non western world has already woken up to this. Every other little tinpot dictator is handled this way, why not Trump?

And not that it cannot be done. Little Donny Jr. has already made at least 15 mn from his India trip.

[Officer of Engineers]

Ah, thanks for making that clear. I was expecting something more dramatic and punitive than "He blamed the Brits". In other words, he did nothing apart from issuing some whiny-ass statements.

He did more than that. He gave Syria to Putin. However, he could not punish the Brits for the very action that he himself was seeking for a way out of his Red Line, Congressional Approval.

Every memoir I’ve seen has it exactly the other way around.

Snowden was camped out in the Moscow airport, and Obama asked Putin to send him back. Putin gave him asylum, so Obama cancelled the planned summit meeting. That's the background to the state of tension between the US and Russia.

A month or two later, in August 2013, Assad killed some 1,400 of his own people with chemical weapons. Secretary of State John Kerry said it was time to remove his chemical weapons ability, and perhaps to remove Assad from power. Obama said he had the power and the will to go into Syria and destroy its chemical weapons capability, but that he would ask for congressional approval. That's for the haters who say he was abusing presidential authority.

His Red Line in the Sand had nothing to do Congress. He didn't seek Congressional Approval for Lybia, bombing ISIL, nor taking out OBL. Congress was his way of chickening out when there was no popular support for his actions.

[Officer of Engineers]

The non western world has already woken up to this. Every other little tinpot dictator is handled this way, why not Trump?

Really? Putin had no relief despite having a "good relationship" with Trump and Xi just got slapped with $50bil in tarrifs.

[antimony]

Really? Putin had no relief despite having a "good relationship" with Trump and Xi just got slapped with $50bil in tarrifs.

You obviously missed the ZTE news, and Putin has Trump batting for him across the board. Also, 300 Russian mercs dead is a cheap deal if Putin can get the entire Western worls in disarray.