Page 17 of 34 FirstFirst ... 891011121314151617181920212223242526 ... LastLast
Results 241 to 255 of 505

Thread: US Steel & Aluminum Tariffs

  1. #241
    Senior Contributor
    Join Date
    03 Sep 17
    Posts
    1,085
    Quote Originally Posted by antimony View Post
    So you against the OBL hit now? You think they should have got a pass?
    You asked what he has done when the allies didn't fall into line. He attacked their sovergnty. Whatever good that came out of chucking that piece of shit into the ocean does not change the fact that Obama didn't give one hoot about his ally. Considering the continued drone attacks inside Pakistan after that, Obama expected and got Pakistan to fall into line.

    That is far more adverse than having trade disputes when you can violate your ally's airspace and lands with impunity.
    Last edited by WABs_OOE; 16 Jun 18, at 18:38.

  2. #242
    Senior Contributor antimony's Avatar
    Join Date
    22 Feb 08
    Location
    Seattle, WA
    Posts
    4,135
    Quote Originally Posted by WABs_OOE View Post
    You asked what he has done when the allies didn't fall into line. He attacked their sovergnty. Whatever good that came out of chucking that piece of shit into the ocean does not change the fact that Obama didn't give one hoot about his ally. Considering the continued drone attacks inside Pakistan after that, Obama expected and got Pakistan to fall into line.

    That is far more adverse than having trade disputes when you can violate your ally's airspace and lands with impunity.
    I recall vividly, on this very board, American WABBERS arguing with the Pakistani WABBERs that the OBL hit was in fact legal as US and Pakistan were allies and OBL was recognized as an enemy of both. Therefore

    But we were talking about the Brits. What actions, specifically, did Obama take against Britain when the Parliament struck the Syrian Strike proposal down?
    "Is God willing to prevent evil, but not able? Then he is not omnipotent. Is he able, but not willing? Then he is malevolent. Is he both able and willing? Then whence cometh evil? Is he neither able nor willing? Then why call him God?" ~ Epicurus

  3. #243
    Senior Contributor
    Join Date
    03 Sep 17
    Posts
    1,085
    Quote Originally Posted by antimony View Post
    I recall vividly, on this very board, American WABBERS arguing with the Pakistani WABBERs that the OBL hit was in fact legal as US and Pakistan were allies and OBL was recognized as an enemy of both. Therefore

    But we were talking about the Brits. What actions, specifically, did Obama take against Britain when the Parliament struck the Syrian Strike proposal down?
    You asked two questions:

    1) How did Obama expects everyone to fall into line - the Brits answered the question.

    2) What did Obama do when they didn't fall into line - the Pakistanis answered that question.
    Last edited by WABs_OOE; 16 Jun 18, at 21:27.

  4. #244
    Senior Contributor antimony's Avatar
    Join Date
    22 Feb 08
    Location
    Seattle, WA
    Posts
    4,135
    Quote Originally Posted by WABs_OOE View Post
    You asked two questions:


    1) How did Obama expects everyone to fall into line - the Brits answered the question.

    2) What did Obama do when they didn't fall into line - the Pakistanis answered that question.
    Col,

    I asked, very specifically, what Obama did to the Brits when they did not fall in line. Sanctions? Tariff?

    If you would like to discuss OBL then I would respectfully refer you to this thread (with a certain Officer of Engineers). Please direct any outrage to Agnostic Muslim and others.

    http://www.worldaffairsboard.com/sho...ighlight=laden
    "Is God willing to prevent evil, but not able? Then he is not omnipotent. Is he able, but not willing? Then he is malevolent. Is he both able and willing? Then whence cometh evil? Is he neither able nor willing? Then why call him God?" ~ Epicurus

  5. #245
    Senior Contributor
    Join Date
    03 Sep 17
    Posts
    1,085
    Quote Originally Posted by antimony View Post
    Col,

    I asked, very specifically, what Obama did to the Brits when they did not fall in line. Sanctions? Tariff?
    He blamed the Brits for his own failure to strike at Syria. He publically took "the high road" of refusing to strike despite pleas from the Establishment, ignoring the fact that it was he whom in fact screamed "charge" in the first place. Counted in that Establishment are the Brits.

    This is the point where he begged Putin to save his ass.

    Quote Originally Posted by antimony View Post
    If you would like to discuss OBL then I would respectfully refer you to this thread (with a certain Officer of Engineers). Please direct any outrage to Agnostic Muslim and others.

    http://www.worldaffairsboard.com/sho...ighlight=laden
    The point here is that Obama didn't give a rat's ass about Pakistani sovergnty. I am not discussing the legality of the strike here. Frankly, at that point, I totally expected the fiction that Pakistan is an ally to be dropped but instead, Obama found it more convient to keep them on a tighter leash.
    Last edited by WABs_OOE; 17 Jun 18, at 00:07.

  6. #246
    Administrator
    Lei Feng Protege
    Defense Professional
    Join Date
    23 Aug 05
    Location
    Arlington, VA
    Posts
    13,721
    yet Allied discontent with Trump far surpasses Allied discontent with Obama. the question is what did the US gain from the discontent.

    in the OBL case, turning OBL into jelly was a US national security objective that far outweighed the concerns of a putative ally. in this case, it's...ah, not clear whether a squabble over tariffs outweighs the concerns of our far better allies.
    There is a cult of ignorance in the United States, and there has always been. The strain of anti-intellectualism has been a constant thread winding its way through our political and cultural life, nurtured by the false notion that democracy means that "My ignorance is just as good as your knowledge."- Isaac Asimov

  7. #247
    Senior Contributor antimony's Avatar
    Join Date
    22 Feb 08
    Location
    Seattle, WA
    Posts
    4,135
    Quote Originally Posted by WABs_OOE View Post
    He blamed the Brits for his own failure to strike at Syria. He publically took "the high road" of refusing to strike despite pleas from the Establishment, ignoring the fact that it was he whom in fact screamed "charge" in the first place. Counted in that Establishment are the Brits.
    Yes, Obama the typical liberal bleeding heart SJW chickenshit.

    Now that we got that out our system, I would like to come back to my question.

    What did Obama do to the Brits (not Pakistanis, Syrians, Canadians, Russians or anybody else) when they did not fall in line? Did he impose sanctions? Did he slap tariffs? Did he vote against UK interests anywhere? Did he send Seal Team Six after the Korgis? What, specifically did he do?
    "Is God willing to prevent evil, but not able? Then he is not omnipotent. Is he able, but not willing? Then he is malevolent. Is he both able and willing? Then whence cometh evil? Is he neither able nor willing? Then why call him God?" ~ Epicurus

  8. #248
    Senior Contributor
    Join Date
    03 Sep 17
    Posts
    1,085
    Quote Originally Posted by antimony View Post
    Now that we got that out our system, I would like to come back to my question.

    What did Obama do to the Brits (not Pakistanis, Syrians, Canadians, Russians or anybody else) when they did not fall in line? Did he impose sanctions? Did he slap tariffs? Did he vote against UK interests anywhere? Did he send Seal Team Six after the Korgis? What, specifically did he do?
    Question has been answered. Just because you do not like the answer does not make the answer any less valid. He blamed the Brits.

  9. #249
    Senior Contributor antimony's Avatar
    Join Date
    22 Feb 08
    Location
    Seattle, WA
    Posts
    4,135
    Quote Originally Posted by WABs_OOE View Post
    Question has been answered. Just because you do not like the answer does not make the answer any less valid. He blamed the Brits.
    Ah, thanks for making that clear. I was expecting something more dramatic and punitive than "He blamed the Brits". In other words, he did nothing apart from issuing some whiny-ass statements.
    "Is God willing to prevent evil, but not able? Then he is not omnipotent. Is he able, but not willing? Then he is malevolent. Is he both able and willing? Then whence cometh evil? Is he neither able nor willing? Then why call him God?" ~ Epicurus

  10. #250
    Senior Contributor DOR's Avatar
    Join Date
    08 Mar 11
    Location
    London
    Posts
    2,900
    Quote Originally Posted by WABs_OOE View Post

    This is the point where he begged Putin to save his ass.
    .
    Every memoir I’ve seen has it exactly the other way around.

    Snowden was camped out in the Moscow airport, and Obama asked Putin to send him back. Putin gave him asylum, so Obama cancelled the planned summit meeting. That's the background to the state of tension between the US and Russia.

    A month or two later, in August 2013, Assad killed some 1,400 of his own people with chemical weapons. Secretary of State John Kerry said it was time to remove his chemical weapons ability, and perhaps to remove Assad from power. Obama said he had the power and the will to go into Syria and destroy its chemical weapons capability, but that he would ask for congressional approval. That's for the haters who say he was abusing presidential authority.

    With a day or two to go, Putin said, wait. Let me deal with this.
    Foreign Minister Sergey Lavrov got an agreement from Assad to turn over his chemical weapons to Russia, and Obama agreed that would be sufficient.

    Since Obama didn’t have a strong coalition behind him, and just about every military adviser said “don’t get into a ground war in the middle east,” he agreed.

    And, on September 9, Ann Coulter makes her only deliberately truthful statement about the Obama Administration: “This is just his way of saying we’re not interested in getting into the Syrian civil war.”
    Trust me?
    I'm an economist!

  11. #251
    Senior Contributor DOR's Avatar
    Join Date
    08 Mar 11
    Location
    London
    Posts
    2,900

    Trade war, round two

    The US and China announced new import duties on their own imports, thereby confirming that the protectionist is the stupidest kind of economic criminal.

    Because Washington is unhappy with Beijing, America will punish the people and companies in America that buy the following things from China:

    Lubricating oils _ _ Lubricating greases
    Polyethylene _ _ Ethylene copolymer _ _ Ethylene-vinyl acetate copolymers
    Polymers of ethylene _ _ Polypropylene _ _ Polyisobutylene
    Propylene copolymers _ _ Polystyrene _ _ Styrene-acrylonitrile
    ABS copolymers _ _ MBS copolymers _ _ Polymers of styrene
    Polyvinyl chloride _ _ Vinyl chloride copolymer _ _ Vinylidene chloride polymers
    PTFE _ _ Fluoropolymers, elastomeric, other than polytetrafluoroethylene
    Polymers of vinyl chloride or of other halogenated olefins,
    Polyvinyl acetate, in aqueous dispersion _ _ Vinyl acetate copolymers, in aqueous dispersion
    Polyvinyl alcohols _ _ Copolymers of vinyl esters _ _ Polymethyl methacrylate
    Acrylic polymers (except PMMA) s, elastomeric
    Polyacetals _ _ Polyethers, other than polyacetals, _ _ Epoxide resins
    Polycarbonates _ _ Alkyd resins _ _ Polyethylene terephthalate
    Poly(lactic acid) _ _ Unsaturated allyl resins
    Thermoplastic liquid crystal aromatic polyester copolymers
    Polyamide-6, -11, -12, -6,6, -6,9, -6,10 or -6,12
    Bis(4-amino-3-methylcyclohexyl)methaneisophthalic acid-laurolactam copolymer
    Urea resins; thiourea resins _ _ Melamine resins _ _ Phenolic resins
    Polyurethanes, elastomeric, _ _ Polyurethanes: cements, _ _ Silicones
    Petroleum resins, coumarone, indene, or coumarone-indene resins and polyterpenes,,_ _
    Elastomeric polysulfides, polysulfones _ _ carbodiimide or homopolymer
    Thermoplastic polysulfides, polysulfones
    Benzenamine; and hydrocarbon novolac cyanate ester
    Thermosetting polysulfides, polysulfones
    Chlorinated synthetic rubber _ _ Polysulfides, polysulfones
    Cellulose acetates, plasticized _ _ Cellulose nitrates (including collodions)
    Cellulose and its chemical derivatives, _ _ Alginic acid, and its salts and esters,
    Chemical derivatives of natural rubber _ _ Natural polymers and modified natural polymers
    Cross-linked polyvinylbenzyltrimethylammonium chloride (Cholestyramine resin USP)
    Ion-exchangers _ _ Monofilament _ _ Rods, sticks and profile shapes, of plastics
    Plastic, PVC, etc tubes, pipes and hoses _
    Self- and non-adhesive plates, sheets, other flat shapes, of plastics,
    Glass rods of fused quartz or other fused silica_ _

    Metal
    Iron or steel, bridges and bridge sections _ _ Iron or steel, towers and lattice masts
    Iron or steel columns, pillars, posts, beams and girders _ _ Steel, grating for structures
    Aluminum, stranded wire, cables & the like
    Steam turbines other than for marine propulsion _ _ Spark-ignition reciprocating piston engines
    Compression-ignition internal-combustion piston engines
    Machinery for liquefying air or gas _ _ Machinery and equipment for making paper pulp, paper or paperboard
    Industrial machinery, plant or equipment for the treatment of materials, by process, involving a change in temperature
    Calendering or similar rolling machines for making paper pulp, paper or paperboard
    Parts of calendering or rolling machines for processing textiles
    Agricultural or horticultural projecting or dispersing equipment including irrigation,equipment
    Harrows (other than disc), scarifiers, cultivators, weeders and hoes for soil,preparation or cultivation
    No-till direct seeders, planters and transplanters _ _ Fertilizer distributors
    Parts of photocopying apparatus _ _ Parts for metal-rolling mills,
    Sawing machines for working stone, ceramics, concrete or for cold working glass
    Drilling or mortising machines for working wood, cork, bone, hard rubber, hard,plastics or similar hard materials
    Splitting, slicing or paring machines for working wood, cork, bone, hard rubber, hard,plastics or similar hard materials
    Part/accessory of printed circuit assemblies _ _ Machines for manufacturing or hot working glass or glassware,
    Bearing housings plain shaft bearings _ _ Machines and apparatus for the manufacture of boules or wafers
    Machines and apparatus for the manufacture of semiconductor devices or electronic,integrated circuits
    Machines and apparatus for the manufacture of flat panel displays
    Machines and apparatus for the manufacture of masks and reticles; for the assembly,of electronic integrated circuits;
    Parts and accessories of the machines and apparatus for the manufacture of, semiconductor devices, electronic integrated circuits and flat panel
    Electric motors _ _ Universal AC/DC motors
    Other storage batteries _ _ Voltage and voltage-current regulators
    Other antennas and antenna reflectors of all kinds and parts, for use
    Electrical apparatus for protecting electrical circuits_ _ Certain specified electronic and electromechanical snap-action switches,
    Connectors for optical fibers, optical fiber bundles or cables
    Electric control panels _ _ Diodes, other than photosensitive or light-emitting diodes
    Diodes for semiconductor devices, other than light-emitting diodes
    Electronic integrated circuits: processors and controllers
    Electronic integrated circuits: memories _ _ Electronic IC amplifiers
    Synchros and transducers; defrosters and demisters with electric, resistors for aircraft
    Insulated electric conductors of a kind used for telecommunications,

    Vehicles
    Rail locomotives powered by batteries _ _ Diesel-electric locomotives
    Railway or tramway passenger coaches and tank cars
    Parts of railway/tramway locomotives/rolling stock
    Containers (including containers for transport of fluids)
    Road tractors for semi-trailers _ _ Track-laying tractors,
    Tractors for agricultural use _ _ tractors not for agricultural use
    Motorcycles (incl. mopeds) _ _ Vessels, designed for refrigerated vessels
    Floating docks

    Instruments
    Optical fibers, optical fiber bundles and cables _ _ Sheets and plates of polarizing material
    Direction finding compasses _ _ Pyrometers _ _ Thermometers
    Electrical: hydrometers & sim. floating instr., hygrometers, psychometers, & any,comb.
    Electrical gas or smoke analysis apparatus _ _ Microtomes
    Gas supply or production meters _ _ Liquid supply or production meters,
    Electricity supply or production meters _ _ Speedometers and tachometers,
    Parts and accessories of revolution counters
    Multimeters for measuring or checking electrical voltage, current, resistance
    Multimeters, with a recording device
    Instruments and apparatus for measuring, checking or detecting electrical quantities, or ionizing radiations: with a recording device
    Aircraft tires

    Nuclear reactors _ _ Parts of nuclear reactors
    Machinery and apparatus for isotopic separation _ _ Fuel elements (cartridges), non-irradiated
    Watertube boilers _ _ Vapor-generating boilers, including _ _ Super-heated water boilers
    Steam turbines for marine propulsion
    Spark-ignition reciprocating or rotary internal combustion piston engines for use in aircraft
    Marine propulsion engines for outboard motors _ _ Agricultural propulsion engines
    Parts for internal combustion aircraft engines
    Hydraulic turbines and water wheels _ _ Aircraft turbojets _ _ Aircraft turbo propellers
    Reaction engines other than turbojets _ _ Hydraulic power engines and motors
    Hydrojet engines for marine propulsion _ _ Pneumatic power engines
    Spring-operated and weight-operated motors _ _ Pumps for liquids
    Liquid elevators _ _ Parts of fuel-injection pumps _ _ Parts of stock pumps
    Compressors of a kind used in refrigerating equipment
    Turbocharger and supercharger fans _ _ Turbocharger and supercharger air compressors
    Stators and rotors _ _ Parts of air or gas compressors, _ _ Parts of air or vacuum pumps
    Parts for furnace burners, mechanical stokers, mechanical grates, mechanical ash dischargers
    Furnaces and ovens for the roasting, melting or other heat treatment of ores, pyrites or of metals
    Industrial or laboratory furnaces and ovens _ _ Parts thereof
    Refrigerating or freezing equipment _ _ Instantaneous gas water heaters, nonelectric
    Storage water heaters, nonelectric _ _ Dryers for agricultural products,
    Dryers for wood _ _ Dryers for paper pulp, paper or paperboard
    Distilling or rectifying plant, not used for domestic purposes
    Heat exchange units, _ _ Machinery for liquefying air or gas,
    Parts of instantaneous or storage water heaters; machinery and plant, for making paper pulp, paper or paperboard; heat exchange units; molten-salt-cooled acrylic acid reactors; certain medical, surgical or laboratory sterilizers; electromechanical tools; or for machinery, plant or laboratory equipment
    Calendering or other rolling machines, other than for metals or glass,
    Cylinders for textile calendering or rolling machines
    Cylinders for paper pulp, paper or paperboard calendering or rolling machines
    Cylinders for calendering and similar rolling machines
    Parts of calendering or rolling machines for making paper pulp, paper or paperboard
    Parts of calendering or other rolling machines, other than for metals or glass
    Centrifuges, other than cream separators or clothes dryers
    Machinery and apparatus for filtering or purifying water
    Machinery and apparatus for filtering or purifying beverages other than water
    Filtering or purifying machinery and apparatus for liquids
    Catalytic converters
    Filtering or purifying machinery and apparatus for gases, other than intake air filters for internal combustion engines or catalytic conv.
    Parts of centrifuges, including centrifugal dryers
    Parts for filtering or purifying machinery or apparatus for liquids or gases
    Dishwashing machines other than of the household type
    Machinery for cleaning or drying bottles or other containers
    Can-sealing machines
    Machinery for filling, closing, sealing, capsuling or labeling bottles, cans, boxes or other containers; machinery for aerating beverages; nesoi
    Machinery for packing or wrapping pipe tobacco, candy and cigarette packages; combination candy cutting and wrapping machines
    Packing or wrapping machinery
    Parts of dishwashing machines
    Parts of packing or wrapping machinery
    Scales for continuous weighing of goods on conveyors using electronic means for gauging weights
    Other scales for continuous weighing of goods on conveyors
    Constant weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales
    Weighing machinery having a maximum weighing capacity exceeding 30 kg but not exceeding 5000 kg
    Weighing machinery with maximum capacity exceeding 5000 kg, using electronic means for gauging
    Weighing machinery with maximum capacity exceeding 5000 kg, not using electronic means for gauging nesoi
    Parts of weighing machinery using electronic means for gauging, except parts for weighing motor vehicles
    Other parts of weighing machinery, including weights
    Mechanical appliances for projecting, dispersing or spraying liquids or powders, used for making printed circuits or printed circuit assemblies
    Parts of sand blasting machines
    Pulley tackle and hoists other than skip hoists or hoists used for raising vehicles, powered by electric motor
    Winches nesoi, and capstans, not powered by electric motor
    Derricks, cranes and other lifting machinery nesoi, self-propelled, on tires
    Derricks, cranes and other lifting machinery nesoi, self-propelled, not on tires
    Derricks, cranes and other lifting machinery nesoi
    Self-propelled works trucks powered by an electric motor, rider type forklift trucks
    Self-propelled works trucks powered by an electric motor, fitted with lifting and handling equipment
    Self-propelled works trucks not powered by an electric motor, rider type forklift trucks
    Self-propelled works trucks not powered by an electric motor, fitted with lifting and handling equipment
    Pneumatic elevators and conveyors
    Continuous-action elevators and conveyors, for goods or materials, specially designed for underground use
    Bucket type continuous-action elevators and conveyors, for goods or materials
    Belt type continuous-action elevators and conveyors, for goods or materials
    Continuous-action elevators and conveyors, for goods or materials
    Machinery for lifting, handling, loading or unloading
    Self-propelled bulldozers and angledozers, for track laying
    Self-propelled bulldozers and angledozers other than track laying
    Self-propelled graders and levelers
    Self-propelled scrapers
    Self-propelled tamping machines and road rollers
    Self-propelled front-end shovel loaders, wheel-type
    Self-propelled front-end shovel loaders, other than wheel-type
    Self-propelled backhoes, shovels, clamshells and draglines with a 360 degree revolving superstructure
    Self-propelled machinery with a 360 degree revolving superstructure, other than backhoes, shovels, clamshells and draglines
    Self-propelled backhoes, shovels, clamshells and draglines not with a 360 degree revolving superstructure
    Self-propelled machinery not with a 360 degree revolving superstructure, other than backhoes, shovels, clamshells and draglines
    Pile-drivers and pile-extractors
    Self-propelled coal or rock cutters and tunneling machinery
    Coal or rock cutters and tunneling machinery, not self-propelled
    Self-propelled boring or sinking machinery
    Boring or sinking machinery, not self-propelled
    Self-propelled machinery for working earth, minerals or ores
    Tamping or compacting machinery, not self-propelled
    Machinery for working earth, minerals or ores, not self-propelled
    Parts suitable for use solely or principally with the machinery of heading 8425
    Parts suitable for use solely or principally with the machinery of heading 8427
    Parts suitable for use solely or principally with passenger or freight elevators other than continuous action, skip hoists or escalators
    Parts suitable for use solely or principally with the machinery of heading 8428 nesoi
    Buckets, shovels, grabs and grips suitable for use solely or principally with the machinery of headings 84268429 or 8430
    Bulldozer or angledozer blades suitable for use solely or principally with the machinery of heading 8426 8429 or 8430
    Parts for offshore oil & natural gas, drilling and production platforms
    Parts for boring or sinking machinery of 8430.41 or 8430.49 nesoi
    Parts suitable for use solely or principally with the machinery of heading 8426 nesoi
    Parts suitable for use solely or principally with the machinery of heading 8429 or 8430 nesoi
    Plows for soil preparation or cultivation
    Disc harrows for soil preparation or cultivation
    Agricultural, horticultural or forestry machinery for soil preparation or cultivation; lawn or sports ground rollers
    Parts of agricultural, horticultural or forestry machinery for soil preparation or cultivation; parts of lawn or sports ground rollers
    Mowers nesoi, including cutter bars for tractor mounting
    Haymaking machinery other than mowers
    Straw or fodder balers, including pick-up balers
    Combine harvester-threshers
    Threshing machinery other than combine harvester-threshers
    Root or tuber harvesting machines
    Harvesting machinery or threshing machinery
    Machines for cleaning, sorting or grading eggs, fruit or other agricultural produce
    Parts for machinery of heading 8433 nesoi
    Dairy machinery other than milking machines
    Parts for milking machines and dairy machinery
    Machinery for preparing animal feeds
    Poultry incubators and brooders
    Poultry-keeping machinery
    Agricultural, horticultural, forestry or bee-keeping machinery
    Parts of poultry-keeping machinery or poultry incubators and brooders
    Parts for agricultural, horticultural, forestry or bee-keeping machinery
    Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables
    Machinery used in the milling industry or for the working of cereals or dried leguminous vegetables, other than farm type machinery
    Parts for machinery used in the milling industry or for cleaning, sorting, grading or working of cereals or dried leguminous vegetables
    Machinery for the preparation of meat or poultry
    Machinery for the preparation of fruits, nuts or vegetables
    Machinery for the industrial preparation or manufacture of food or drink
    Parts of machinery for the industrial preparation or manufacture of food or drink, other than sugar manufacturing
    Machinery for making pulp of fibrous cellulosic material
    Machinery for making paper or paperboard
    Machinery for finishing paper or paperboard
    Bed plates, roll bars and other stock-treating parts of machinery for making pulp of fibrous cellulosic materials
    Parts of machinery for making pulp of fibrous cellulosic materials
    Parts of machinery for making paper or paperboard
    Parts of machinery for finishing paper or paperboard
    Machines for making bags, sacks or envelopes of paper pulp, paper or paperboard
    Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by molding, of paper pulp, paper or paperboard
    Machines for molding articles in paper pulp, paper or paperboard
    Machinery for making up paper pulp, paper or paperboard
    Parts for machinery used in making up paper pulp, paper or paperboard, including cutting machines
    Machinery, apparatus and equipment of heading 8442
    Parts of the machinery, apparatus or equipment of subheadings 8442.10 8442.20 and 8442.30
    Reel-fed offset printing machinery, double-width newspaper printing presses
    Reel-fed offset printing machinery, other than double-width newspaper printing presses
    Sheet-fed offset printing machinery, office type (sheet size not exceeding 22 X 36 cm)
    Offset printing machinery
    Letterpress printing machinery, excluding flexographic printing, reel-fed
    Gravure printing machinery
    Printing machinery
    Machines for uses ancillary to printing
    Parts of printer units of subheading 8443.32.10 specified in additional U.S. note 2 to this chapter
    Parts and accessories of copying machines; nesoi
    Machines for extruding, drawing, texturing or cutting man-made textile materials
    Converters of a kind used in metallurgy or in metal foundries
    Casting machines, of a kind used in metallurgy or in metal foundries
    Parts of converters, ladles, ingot molds and casting machines, of a kind used in metallurgy or in metal foundries
    Metal-rolling tube mills
    Metal-rolling mills, other than tube mills, hot or combination hot and cold
    Metal-rolling mills, other than tube mills, cold
    Rolls for metal-rolling mills
    Parts for metal-rolling mills, other than rolls
    Machine tools operated by laser, for working metal
    Machine tools operated by laser, of a kind used solely or principally for manufacture of printed circuits
    Machine tools operated by laser
    Machine tools operated by light or photon beam processes, for working metal
    Machine tools operated by light or photon beam processes, of a kind used solely or principally for the manufacture of printed circuits
    Machine tools operated by light or photon beam processes
    Machine tools operated by ultrasonic processes, for working metal
    Machine tools operated by ultrasonic processes, other than for working metal
    Machine tools operated by electro-discharge processes, for working metal
    Machine tools operated by electro-discharge processes, other than for working metal
    Machine tools operated by plasma arc process, for working metal
    Machine tools operated by plasma arc process, other than for working metal
    Water-jet cutting machines
    Machine tools operated by electro-chemical or ionic-beam processes, for working metal
    Machine tools operated by electro-chemical or ionic-beam processes, other than for working metal
    Machining centers for working metal
    Unit construction machines (single station), for working metal
    Multistation transfer machines for working metal
    Horizontal lathes (including turning centers) for removing metal, numerically controlled
    Horizontal lathes (including turning centers) for removing metal, other than numerically controlled
    Vertical turret lathes (including turning centers) for removing metal, numerically controlled
    Lathes (including turning centers), other than horizontal or vertical turret lathes, for removing metal, numerically controlled
    Vertical turret lathes (including turning centers) for removing metal, other than numerically controlled
    Lathes (including turning centers), other than horizontal or vertical turret lathes, for removing metal, other than numerically controlled
    Way-type unit head machines for drilling, boring, milling, threading or tapping by removing metal, other than lathes of heading 8458
    Drilling machines, numerically controlled
    Boring-milling machines, numerically controlled
    Boring-milling machines, other than numerically controlled
    Boring machines, numerically controlled
    Boring machines, not numerically controlled
    Milling machines, knee type, numerically controlled
    Milling machines, other than knee type, numerically controlled
    Milling machines, other than knee type, other than numerically controlled
    Other threading or tapping machines, numerically controlled
    Other threading or tapping machines nesoi
    Flat-surface grinding machines, numerically controlled
    Flat-surface grinding machines, not numerically controlled
    Centerless grinding machines, numerically controlled
    Other cylindrical grinding machines, numerically controlled
    Other grinding machines, numerically controlled
    Other grinding machines, other than numerically controlled
    Sharpening (tool or cutter grinding) machines for working metal or cermets, numerically controlled
    Honing or lapping machines for working metal or cermets, numerically controlled
    Honing or lapping machines for working metal or cermets, other than numerically controlled
    Other machine tools for deburring, polishing or otherwise finishing metal or cermets, numerically controlled
    Other machine tools for deburring, polishing or otherwise finishing metal or cermets, other than numerically controlled
    Shaping or slotting machines for working by removing metal or cermets, numerically controlled
    Shaping or slotting machines for working by removing metal or cermets, other than numerically controlled
    Broaching machines for working by removing metal or cermets, numerically controlled
    Broaching machines for working by removing metal or cermets, other than numerically controlled
    Gear cutting machines for working by removing metal or cermets
    Gear grinding or finishing machines for working by removing metal or cermets
    Sawing or cutting-off machines for working by removing metal or cermets, numerically controlled
    Machine-tools for working by removing metal or cermets, numerically controlled
    Machine-tools for working by removing metal or cermets, other than numerically controlled
    Forging or die-stamping machines (including presses) and hammers
    Bending, folding, straightening or flattening machines (including presses) numerically controlled for working metal or metal carbides
    Bending, folding, straightening or flattening machines (including presses) not numerically controlled for working metal or metal carbides
    Shearing machines (incl. presses), excl. combined punching & shearing machines, numerically controlled for working metal or metal carbides
    Shearing machines (incl. presses), excl. combined punch & shearing machines, nt numerically controlled for working metal or metal carbides
    Punch/notch machines (incl. presses), incl. combined punch & shearing machines, numerically controlled for working metal or metal carbides
    Punch/notch machines (incl. presses), incl. combined punch & shear machines, not numerically controlled for working metal or metal carbides
    Hydraulic presses, numerically controlled
    Hydraulic presses, not numerically controlled
    Machine tools (including nonhydraulic presses) for working metal or metal carbides, numerically controlled
    Machine tools (including nonhydraulic presses) for working metal or metal carbides, not numerically controlled
    Draw-benches for bars, tubes, profiles, wire or the like, for working metal or cermets, without removing material
    Thread rolling machines for working metal or cermets, without removing material
    Machines for working wire of metal or cermets, without removing material
    Machine tools for working metal or cermets, without removing material
    Grinding or polishing machines for working stone, ceramics, concrete, asbestos- cement or like mineral materials, or glass
    Machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass
    Machines for working certain hard materials which can carry out different types of machining operations w/o tool change between operations
    Planing, milling or molding (by cutting) machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials
    Grinding, sanding or polishing machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials
    Bending or assembling machines for working wood, cork, bone hard rubber, hard plastics or similar hard materials
    Machine tools for working wood, cork, bone, hard rubber, hard plastics and similar hard materials
    Tool holders and self-opening dieheads for use solely or principally with machines of headings 8456 to 8465 nesoi
    Work holders for machine tools used in cutting gears
    Work holders for machine tools other than those used in cutting gears
    Dividing heads for use solely or principally for machine tools of headings 8456 to 8465
    Special attachments (which are machines) use solely or principally for machines of heading 8456 to 8465 excluding dividing heads
    Parts and accessories nesoi, for machines of heading 8464
    Cast-iron parts not advanced beyond cleaning and specifically machined, for machines of heading 8465
    Parts and accessories nesoi, for machines of heading 8465
    Certain parts for water-jet cutting machines
    Certain specified parts and accessories of metal working machine tools for cutting gears
    Certain specified parts and accessories for machines of heading 8456 to 8461 nesoi
    Other cast-iron parts not advanced beyond cleaning and specifically machined, for metalworking machine tools for cutting, etc.
    Other parts and accessories of metal working machine tools for cutting gears
    Parts & accessories for machines of heading 8456 to 8461 used to make printed circuits or PCAs, parts of heading 8517 or computers
    Other parts and accessories for machines of heading 8456 to 8461 nesoi
    Certain specified cast-iron parts not advanced beyond cleaning and specifically machined, for machines of heading 8462 or 8463
    Other cast-iron parts not advanced beyond cleaning and specifically machined, for machines of heading 8462 or 8463
    Other specified parts and accessories for machines of heading 8462 or 8463 nesoi
    Other parts and accessories for machines of heading 8462 or 8463
    Tools for working in the hand, pneumatic, rotary type, suitable for metal working
    Tools for working in the hand, pneumatic, rotary type, other than suitable for metal working
    Gas-operated machinery, apparatus and appliances, not hand-directed or -controlled, used for soldering, brazing, welding or tempering
    Machinery and apparatus other than hand-directed or -controlled, used for soldering, brazing or welding, not gas-operated
    ADP magnetic disk drive storage units, disk dia. ov 21 cm, not entered with the rest of a system
    ADP magnetic disk drive storage units, disk dia. n/ov 21 cm, not in cabinet, w/o attached external power supply, n/entered w/rest of a system
    ADP storage units other than magnetic disk, not in cabinets for placing on a table, etc., not entered with the rest of a system
    ADP storage units other than magnetic disk drive units, not entered with the rest of a system
    Parts and accessories of the ADP machines of heading 8471 not incorporating a CRT, parts and accessories of printed circuit assemblies
    Printed circuit assemblies for automatic teller machines of subheading 8472.90.10
    Other parts and accessories of machines of heading 8472 nesoi
    Printed circuit assemblies suitable for use with machines of two or more of the headings 8469 to 8472
    Sorting, screening, separating or washing machines for earth, stones, ores or other mineral substances in solid form
    Crushing or grinding machines for earth, stones, ores or other mineral substances
    Concrete or mortar mixers
    Machines for mixing mineral substances with bitumen
    Mixing or kneading machines for earth, stones, ores or other mineral substances
    Machinery for agglomerating, shaping or molding solid mineral fuels, or other mineral products; machines for forming sand foundry molds
    Parts for the machinery of heading 8474
    Machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes
    Machines for making glass optical fibers and preforms thereof
    Parts of machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes
    Parts of machines for manufacturing or hot working glass or glassware
    Injection-molding machines for manufacturing shoes of rubber or plastics
    Injection-molding machines for use in the manufacture of video laser discs
    Injection-molding machines of a type used for working or manufacturing products from rubber or plastics
    Extruders for working rubber or plastics or for the manufacture of products from these materials
    Blow-molding machines for working rubber or plastics or for the manufacture of products from these materials
    Vacuum-molding and other thermoforming machines for working rubber or plastics or for manufacture of products from these materials
    Machinery for molding or retreading pneumatic tires or for molding or otherwise forming inner tubes
    Machinery for working rubber or plastics or for the manufacture of products from these materials
    Base, bed, platen and specified parts of machinery for working rubber or plastics or for manufacture of products from these material
    Barrel screws of machinery for working rubber or plastics or for the manufacture of products from these materials
    Hydraulic assemblies of machinery for working rubber or plastics or for the manufacture of products from these materials
    Parts of machinery for working rubber or plastics or for the manufacture of products from these materials
    Machinery for public works, building or the like
    Machinery for the extraction or preparation of animal or fixed vegetable fats or oils
    Presses for making particle board or fiber building board of wood or other ligneous materials, and mach. for treat. wood or cork
    Rope- or cable-making machines nesoi
    Industrial robots, not elsewhere specified or included
    Machines and mechanical appliances for treating metal, including electric wire coil- winders
    Machines for mixing, kneading, crushing, grinding, screening, sifting, homogenizing, emulsifying or stirring
    Machines for the manufacture of optical media
    Automated electronic component placement machines for making printed circuit assemblies
    Parts of machines and mechanical appliances having individual functions, not specified or included elsewhere in chapter 84
    Mold bases
    Molding patterns
    Molds for metal or metal carbides, injection or compression types
    Molds for metal or metal carbides other than injection or compression types
    Molds for glass
    Molds for rubber or plastics, injection or compression types, for shoe machinery
    Injection or compression type molds for rubber or plastics for the manufacture of semiconductor devices
    Molds for rubber or plastics, injection or compression types, other than for shoe machinery or for manufacture of semiconductor devices
    Pressure-reducing valves for pipes, boiler shells, tanks, vats or the like
    Valves for oleohydraulic or pneumatic transmissions
    Check valves of iron or steel for pipes, boiler shells, tanks, vats or the like
    Check valves other than of copper or iron or steel, for pipes, boiler shells, tanks, vats or the like
    Safety or relief valves for pipes, boiler shells, tanks, vats or the like
    Parts of taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like
    Ball bearings other than ball bearings with integral shafts
    Tapered roller bearings, including cone and tapered roller assemblies
    Spherical roller bearings
    Needle roller bearings
    Cylindrical roller bearings nesoi
    Ball or roller bearings nesoi, including combined ball/roller bearings
    Balls, needles and rollers for ball or roller bearings
    Inner or outer rings or races for ball bearings
    Inner or outer rings or races for taper roller bearings
    Inner or outer rings or races for other bearings
    Parts of ball bearings (including parts of ball bearings with integral shafts)
    Parts of tapered roller bearings
    Parts of other ball or roller bearings
    Bearing housings of the flange, take-up, cartridge and hanger unit type
    Torque converters
    Fixed, multiple and variable ratio speed changers, imported for use with machines for making cellulosic pulp, paper or paperboard
    Ball or roller screws
    Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately
    Flywheels
    Pulleys, including pulley blocks
    Clutches and universal joints
    Chain sprockets and parts thereof
    Parts of flange, take-up, cartridge and hanger units
    Parts of bearing housings and plain shaft bearings
    Parts of articles of subheading 8483.20
    Parts of transmission equipment
    Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal
    Mechanical seals
    Sets or assortments of gaskets and similar joints dissimilar in composition, put up in pouches, envelopes or similar packings
    Ships' or boats propellers and blades therefor
    Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features and other parts nesoi
    Electric motors of an output of under 18.65 W, other than synchronous valued not over $4 each
    Universal AC/DC motors of an output exceeding 37.5 W but not exceeding 74.6 W
    Universal AC/DC motors of an output exceeding 735 W but under 746 W
    Universal AC/DC motors of an output of 746 W or more
    DC motors nesoi, of an output exceeding 37.5 W but not exceeding 74.6 W
    DC motors, of an output exceeding 735 W but under 746 W
    DC motors nesoi, of an output of 746 W but not exceeding 750 W
    DC motors nesoi, of an output exceeding 14.92 kW but not exceeding 75 kW, used as primary source of mechanical power for electric vehicles
    DC motors nesoi, of an output exceeding 14.92 kW but not exceeding 75 kW
    DC motors nesoi, of an output exceeding 150 kW but not exceeding 375 kW
    DC generators of an output exceeding 75 kW but not exceeding 375 kW
    DC motors nesoi, of an output exceeding 375 kW
    DC generators of an output exceeding 375 kW
    AC motors nesoi, multi-phase, of an output exceeding 37.5 W but not exceeding 74.6 W
    AC motors, multi-phase, of an output exceeding 74.6 W but not exceeding 735 W
    AC motors, multi-phase, of an output exceeding 735 W but under 746 W
    AC motors nesoi, multi-phase of an output of 746 W but not exceeding 750 W
    AC motors nesoi, multi-phase, of an output exceeding 14.92 kW but not exceeding 75 kW
    AC motors nesoi, multi-phase, of an output exceeding 75 kW but under 149.2 kW
    AC motors nesoi, multi-phase, of an output exceeding 150 kW
    AC generators (alternators) of an output exceeding 75 kVA but not exceeding 375 kVA
    AC generators (alternators) of an output exceeding 375 kVA but not exceeding 750 kVA
    AC generators (alternators) of an output exceeding 750 kVA
    Electric generating sets with compression-ignition internal-combustion piston engines, of an output not exceeding 75 kVA
    Electric generating sets with compression-ignition internal-combustion piston engines, of an output exceeding 75 kVA but not over 375 kVA
    Electric generating sets with compression-ignition internal-combustion piston engines, of an output exceeding 375 kVA
    Wind-powered electric generating sets
    Electric generating sets
    Electric rotary converters
    Commutators suitable for use solely or principally with the machines of heading 8501 or 8502
    Parts of electric motors under 18.65 W, stators and rotors
    Stators and rotors for electric generators for use on aircraft
    Stators and rotors for electric motors & generators of heading 8501 nesoi
    Parts of electric motors under 18.65 W, other than commutators, stators or rotors
    Parts for electric generators suitable for use on aircraft
    Liquid dielectric transformers having a power handling capacity not exceeding 650 kVA
    Liquid dielectric transformers having a power handling capacity exceeding 650 kVA but not exceeding 10000 kVA
    Liquid dielectric transformers having a power handling capacity exceeding 10000 kVA
    Electrical transformers other than liquid dielectric, having a power handling capacity exceeding 1 kVA but not exceeding 16 kVA
    Electrical transformers other than liquid dielectric, having a power handling capacity exceeding 16 kVA but not exceeding 500 kVA
    Electrical transformers other than liquid dielectric, having a power handling capacity exceeding 500 kVA
    Electrical speed drive controllers for electric motors (static converters)
    Parts of power supplies (other than printed circuit assemblies) for automatic data processing machines or units thereof of heading 8471
    Printed circuit assemblies of the goods of subheading 8504.40 or 8504.50 for telecommunication apparatus
    Printed circuit assemblies of electrical transformers, static converters and inductors
    Parts (other than printed circuit assemblies) of electrical transformers, static converters and inductors
    Flexible permanent magnets, other than of metal
    Electromagnetic couplings, clutches and brakes
    Electromagnetic lifting heads
    Electromagnetic or permanent magnet work holders and parts thereof
    Electromagnets used for MRI
    Other electromagnets and parts thereof, and parts of related electromagnetic articles nesoi
    Silver oxide primary cells and primary batteries having an external volume not exceeding 300 cubic cm
    Silver oxide primary cells and primary batteries having an external volume exceeding 300 cubic cm
    Lithium primary cells and primary batteries
    Air-zinc primary cells and primary batteries
    Parts of primary cells and primary batteries
    Parts of storage batteries, including separators therefor, other than parts of lead-acid storage batteries
    Resistance heated industrial or laboratory furnaces and ovens
    Industrial or laboratory microwave ovens
    Industrial or laboratory furnaces and ovens (other than microwave) functioning by induction or dielectric loss
    Industrial furnaces and ovens for making printed circuits or printed circuit assemblies
    Industrial or laboratory electric industrial or laboratory furnaces and ovens nesoi
    Industrial or laboratory induction or dielectric heating equipment nesoi
    Parts of industrial or laboratory electric furnaces and ovens and other industrial or laboratory induction or dielectric heating equipment
    Electric soldering irons and guns
    Electric brazing or soldering machines and apparatus, other than soldering irons and guns
    Electric machines and apparatus for resistance welding of metal, fully or partly automatic
    Electric machines and apparatus for resistance welding of metal, other than fully or partly automatic
    Electric machines and apparatus for arc (including plasma arc) welding of metals, fully or partly automatic
    Electric machines and apparatus for arc (including plasma arc) welding of metals, other than fully or partly automatic
    Electric welding apparatus nesoi, and electric machines and apparatus for hot spraying metals or sintered metal carbides
    Parts of electric welding machines and apparatus
    Parts of electric soldering or brazing machines & apparatus, & electric apparatus for hot spraying of metals or sintered metal carbides
    Transmission apparatus for radiobroadcasting
    Transceivers
    Transmission apparatus incorporating reception apparatus, other than transceivers
    Television cameras, gyrostabilized
    Television cameras, studio type, other than shoulder-carried or other portable cameras
    Radar apparatus
    Radio navigational aid apparatus, other than radar
    Radio remote control apparatus other than for video game consoles
    Radio receivers
    Reception apparatus for radiobroadcasting
    Radar, radio navigational aid and radio remote control antennas and antenna reflectors, and parts suitable for use therewith
    PCBs and ceramic substrates and subassemblies thereof, for color TV, with components listed in add. US note 4 chap. 85
    PCBs and ceramic substrates and subassemblies thereof, for color TV, not with components listed in add. US note 4 chap. 85
    Printed circuit assemblies for television cameras
    Printed circuit assemblies which are subassemblies of radar, radio nav. aid or remote control apparatus, of 2 or more parts joined together
    Printed circuit assemblies, for radar, radio navigational aid or radio remote control apparatus
    Other printed circuit assemblies suitable for use solely or principally with the apparatus of headings 8525 to 8528 nesoi
    Transceiver assemblies for the apparatus of subheading 8526.10 other than printed circuit assemblies
    Tuners for television apparatus, other than printed circuit assemblies
    Subassies w/2 or more PCBs or ceramic substrates, as spec'd in add. US note 9 ch. 85 for color TV, w/components in add. US note 4, ch.85
    Combinations of PCBs and ceramic substrates and subassemblies thereof for color TV, w/components listed in add. U.S. note 4, chap. 85
    Parts of printed circuit assemblies (including face plates and lock latches) for television cameras
    Parts of printed circuit assemblies (including face plates and lock latches) for television apparatus other than television cameras
    Parts of printed circuit assemblies (including face plates and lock latches) for radar, radio navigational aid or radio remote control app.
    Mounted lenses for use in closed circuit television cameras, separately imported, w/ or w/o attached elec. Connectors or motors
    Other parts of television cameras
    Other parts of television apparatus (other than television cameras)
    Subassies w/2 or more PCBs or ceramic substrates, exc. tuners or converg. ass'ies, for color TV, not w/components in add. US note 4, ch. 85
    Parts of television apparatus
    Assemblies and subassemblies of radar, radio navigational aid or remote control apparatus, of 2 or more parts joined together
    Parts suitable for use solely or principally in radar, radio navigational aid or radio remote control apparatus
    Parts suitable for use solely or principally with the apparatus of headings 8525 to 8528
    Electrical signaling, safety or traffic control equipment for railways, streetcar lines or subways
    Electrical signaling, safety or traffic control equipment for roads, inland waterways, parking facilities, port installations or airfields
    Parts for electrical signaling, safety or traffic control equipment
    Fixed electrical capacitors designed for use in 50/60 Hz circuits and having a reactive power handling capacity of not less than 0.5 kvar
    Tantalum fixed capacitors
    Aluminum electrolytic fixed capacitors
    Ceramic dielectric fixed capacitors, single layer
    Ceramic dielectric fixed capacitors, multilayer
    Dielectric fixed capacitors of paper or plastics
    Fixed electrical capacitors
    Variable or adjustable (pre-set) electrical capacitors
    Parts of electrical capacitors, fixed, variable or adjustable (pre-set)
    Electrical fixed carbon resistors, composition or film types
    Electrical fixed resistors, other than composition or film type carbon resistors, for a power handling capacity not exceeding 20 W
    Electrical fixed resistors, other than composition or film type carbon resistors, for a power handling capacity exceeding 20 W
    Electrical wirewound variable resistors, including rheostats and potentiometers, for a power handling capacity not exceeding 20 W
    Metal oxide resistors
    Electrical variable resistors, other than wirewound, including rheostats and potentiometers
    Other parts of electrical resistors, including rheostats and potentiometers
    Fuses, for a voltage exceeding 1000 V
    Automatic circuit breakers, for a voltage of less than 72.5 kV, but exceeding 1000 V
    Automatic circuit breakers, for a voltage of 72.5 kV or more
    Isolating switches and make-and-break switches, for a voltage exceeding 1
    Electrical motor starters and electrical motor overload protector, for a voltage exceeding 1000 V
    Electrical apparatus nesoi for switching, protecting, or making connections for electrical circuits, for a voltage exceeding 1000 V
    Fuses, for a voltage not exceeding 1000 V
    Automatic circuit breakers, for a voltage not exceeding 1000 V
    Electrical motor overload protectors, for a voltage not exceeding 1000 V
    Relays for switching, protecting or making connections to or in electrical circuits, for a voltage not exceeding 60 V
    Relays for switching, protecting or making connections to or in electrical circuits, for a voltage exceeding 60 but not exceeding 1000 V
    Electrical motor starters (which are switches), for a voltage not exceeding 1000 V
    Switches nesoi, for switching or making connections to or in electrical circuits, for a voltage not exceeding 1000 V
    Connectors: coaxial, cylindrical multicontact, rack and panel, printed circuit, ribbon or flat cable, for a voltage not exceeding 1000 V
    Electrical terminals, electrical splicers and electrical couplings, wafer probers, for a voltage not exceeding 1000 V
    Other electrical apparatus nesoi, for switching or making connections to or in electrical circuits, for a voltage not exceeding 1000 V
    Boards, panels, etc., equipped with apparatus for electric control, for a voltage not exceeding 10 motor control centers
    Touch screens without display capabilities for incorporation in apparatus having a display
    Boards, panels, consoles, desks, cabinets and other bases, equipped with apparatus for electric control, for a voltage exceeding 1,000 V
    Parts of boards, panels, consoles, desks, cabinets and other bases for the goods of heading 8537, not equipped with their apparatus
    Parts for articles of 8535.90.40, 8536.30.40 or 8536.50.40, of ceramic or metallic materials, mech. or elec. reactive to changes in temp.
    Molded parts nesoi, suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537
    Other parts nesoi, suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537
    Arc lamps
    Parts of electrical filament or discharge lamps
    Klystron tubes
    Microwave tubes (other than magnetrons or klystrons) excluding grid-controlled tubes
    Thermionic, cold cathode or photocathode tubes
    Transistors, other than photosensitive transistors, with a dissipation rating of less than 1 W
    Transistors, other than photosensitive transistors, with a dissipation rating of 1 W or more
    Thyristors, diacs and triacs, other than photosensitive devices
    Light-emitting diodes (LED's)
    Photosensitive transistors
    Photosensitive semiconductor devices nesoi, optical coupled isolators
    Photosensitive semiconductor devices nesoi, other
    Semiconductor devices other than photosensitive semiconductor devices
    Mounted piezoelectric crystals
    Parts of diodes, transistors, similar semiconductor devices, photosensitive semiconductor devices, LED's and mounted piezoelectric crystals
    Electrical particle accelerators
    Electrical signal generators
    Electrical machines and apparatus for electroplating, electrolysis, or electrophoresis for making printed circuits
    Other electrical machines and apparatus for electroplating, electrolysis, or electrophoresis
    Physical vapor deposition apparatus
    Flight data recorders
    Electrical machines and apparatus nesoi, designed for connection to telegraphic or telephonic apparatus, instruments or networks
    Microwave amplifiers
    Touch screens without display capabilities for incorporation in apparatus having a display
    Plasma cleaner machines that remove organic contaminants from electron microscopy specimens and holders
    Parts of physical vapor deposition apparatus of subheading 8543.70
    Assemblies and subassemblies for flight data recorders, consisting of 2 or more parts pieces fastened together, printed circuit assemblies
    Assemblies and subassemblies for flight data recorders, consisting of 2 or more parts pieces fastened together, not printed circuit assys.
    Printed circuit assemblies of flat panel displays other than for reception apparatus for television of heading 8528
    Printed circuit assemblies of electrical machines and apparatus, having individual functions
    Insulated (including enameled or anodized) winding wire, of copper
    Insulated (including enameled or anodized) winding wire, other than of copper
    Insulated ignition wiring sets and other wiring sets of a kind used in vehicles, aircraft or ships
    Insulated electric conductors nesoi, of copper, for a voltage not exceeding 1,000 V, not fitted with connectors
    Insulated electric conductors nesoi, not of copper, for a voltage not exceeding 1,000 V, not fitted with connectors
    Insulated electric conductors nesoi, for a voltage exceeding 1,000 V, fitted with connectors
    Insulated electric conductors nesoi, of copper, for a voltage exceeding 1,000 V, not fitted with connectors
    Optical fiber cables made up of individually sheathed fibers
    Rail locomotives powered from an external source of electricity
    Self-propelled railway or tramway coaches, vans and trucks (o/than those of 8604), powered from an external source of electricity
    Self-propelled railway or tramway coaches, vans and trucks (o/than those of 8604), o/than powered from an external source of electricity
    Railway or tramway maintenance or service vehicles, whether or not self-propelled
    Parts of railway/tramway locomotives/rolling stock, truck assemblies for other than self-propelled vehicles
    Parts of railway/tramway locomotives/rolling stock, parts of axles
    Parts of railway/tramway locomotives/rolling stock, wheels, whether or not fitted with axles
    Parts of railway/tramway locomotives/rolling stock, parts of wheels
    Parts of railway/tramway locomotives/rolling stock, parts of truck assemblies for self- propelled vehicles or for non-self-propelled nesoi
    Parts of railway/tramway locomotives/rolling stock, air brakes & parts thereof for non-self-propelled passenger coaches or freight cars
    Parts of railway/tramway locomotives/rolling stock, air brakes & parts thereof for self- propelled vehicles or non-self-propelled stock nesoi
    Parts of railway/tramway locomotives/rolling stock, pts of brakes (o/than air brakes) for non-self-propelled passenger coaches or freight
    Parts of railway/tramway locomotives/rolling stock, pts of brakes (o/th air brakes) for self-propelled vehicles or non-self-propelled nesoi
    Parts, of railway/tramway locomotives
    Parts (o/than brake regulators) nesoi, of railway/tramway, non-self-propelled passenger coaches or freight cars
    Parts, of railway or tramway rolling stock
    Railway or tramway track fixtures and fittings; mechanical signaling, safety or traffic control equipment of all kinds nesoi; parts thereof
    Single axle tractors, other than tractors of 8709
    Track-laying tractors, suitable for agricultural use
    Motor vehicles w/diesel engine, to transport 16 or more persons, incl driver
    Motor vehicles w/diesel engine, to transport 10 to 15 persons, incl driver
    Motor vehicles w/diesel engine & electric motor, to transport 16 or more persons, incl driver
    Motor vehicles w/diesel engine & electric motor, to transport 10 to 15 persons, incl driver
    Motor vehicles w/spark-ign. IC recip. piston engine & electric motor, to transport 16 or more persons, incl driver
    Motor vehicles w/spark-ign. IC recip. piston engine & electric motor, to transport 10 to 15 persons, incl driver
    Motor vehicles w/electric motor, to transport 16 or more persons, incl driver
    Motor vehicles w/electric motor, to transport 10 to 15 persons, incl driver
    Motor vehicles nesoi, to transport 16 or more persons, incl driver
    Motor vehicles nesoi, to transport 10 to 15 persons, incl driver
    Motor vehicles to transport persons, w/spark-ign. IC recip. piston engine, w/cyl capacity <= 1, 000 cc
    Motor vehicles to transport persons, w/spark-ign. IC recip. piston engine, w/cyl capacity > 1, 000cc but <=1,500cc
    Motor vehicles to transport persons, w/spark-ign. IC recip. piston engine, w/cyl capacity >1, 500cc but <=3,000cc
    Motor vehicles to transport persons, w/spark-ign. IC recip. piston engine, w/cyl capacity >3, 000cc
    Motor vehicles to transport persons, w/diesel engines, of a cylinder capacity <= 1,500cc
    Motor vehicles to transport persons, w/diesel engines, of a cylinder capacity > 1,500cc but <= 2,500cc
    Motor vehicles to transport persons, w/diesel engines, of a cylinder capacity > 2, 500cc
    Motor vehicles to transport persons, w/spark-ign. IC recip. piston engine & elec motor incapable of charge by plug to external source
    Motor vehicles to transport persons, w/diesel engine & elec motor incapable of charge by plug to external source
    Motor vehicles to transport persons, w/spark-ign. IC recip. piston engine & elec motor capable of charge by plug to external source
    Motor vehicles to transport persons, w/diesel engine & elec motor capable of charge by plug to external source
    Motor vehicles to transport persons, w/electric motor for propulsion
    Motor vehicles to transport persons
    Mtr. vehicles for transport of goods, cab chassis for dumpers designed for off-highway use
    Mtr. vehicles for transport of goods, complete dumpers designed for off-highway use
    Mtr. vehicles for transport of goods, w/compress.-ign. int. combust. recip. piston engine, w/G.V.W. not over 5 metric tons
    Mtr. vehicles for transport of goods, cab chassis, w/compress.-ign. int. combust. recip. piston engine, w/G.V.W. o/5 but n/o 20 metric tons
    Mtr. vehicl. for transport of goods (o/than cab chassis), w/compress.-ign. int. combust. recip. piston engine, w/G.V.W. o/5 but n/o 20 mtons
    Mtr. vehicles for transport of goods, w/compress.-ign. int. combust. recip. piston engine, w/G.V.W. over 20 metric tons
    Mtr. vehicles for transport of goods, w/spark.-ign. int. combust. recip. piston engine, w/G.V.W. not over 5 metric tons
    Mtr. vehicles for transport of goods, w/spark.-ign. int. combust. recip. piston engine, w/G.V.W. over 5 metric tons
    Mtr. vehicles (o/than for transport of persons or of goods), fire fighting vehicles
    Mtr. vehicles (o/than for transport of persons or of goods), concrete mixers
    Chassis fitted w/engines, for mtr. vehicles of heading 8705
    Chassis fitted w/engines, for tractors suitable for agricultural use
    Electrical, self-propelled, works trucks, not fitted w/lift. equip. and tractors of type used on railway station platforms
    Non-electrical, self-propelled, works trucks, not fitted w/lift. equip. and tractors of type used on railway station platforms
    Parts of self-propelled works trucks, not fitted w/lift. equip. and tractors of the type used on railway station platforms
    Motorcycles (incl. mopeds) and cycles, fitted w/recip. internal-combustion piston engine w/capacity o/800 cc
    Helicopters, with an unladen weight not over 2,000 kg
    Helicopters, with an unladen weight over 2,000 kg
    Airplanes and other powered aircraft, with an unladen weight not over 2,000 kg
    Airplanes and other powered aircraft, with an unladen weight over 2,000 kg but not over 15,000 kg
    Airplanes and other powered aircraft, with an unladen weight over 15,000 kg
    Communication satellites
    Spacecraft, including satellites (o/than communication satellites), and suborbital and spacecraft launch vehicles
    Parts of airplanes and other aircraft, propellers and rotors and parts thereof
    Parts of airplanes and other aircraft, undercarriages and parts thereof
    Parts of airplanes and helicopters
    Parts of communication satellites
    Parts of aircraft (o/than airplanes and helicopters), spacecraft (o/than comm. satell.) and suborbital and launch vehicles
    Aircraft launching gear and parts thereof; deck-arrestors or similar gear and parts thereof
    Air combat ground flying simulators and parts thereof
    Ground flying trainers and parts thereof, other than air combat simulators
    Vessels, designed for the transport of persons, cruise ships, excursion boats and similar vessels; ferry boats of all kinds
    Vessels, designed for the transport of goods, tankers
    Vessels, designed for the transport of goods or for the transport of both persons and goods
    Vessels, fishing; factory ships and other vessels for processing or preserving fishery products
    Vessels, tugs and pusher craft
    Vessels, dredgers
    Floating or submersible drilling or production platforms
    Vessels, light-vessels, fire-floats, floating cranes, & other vessels nesoi, the navigability of which is subsidiary to their main function
    Vessels (including lifeboats other than row boats)
    Vessels and other floating structures for breaking up (scrapping)
    Prisms, mounted, for optical uses
    Mirrors, mounted, for optical uses
    Half-tone screens, mounted, designed for use in engraving or photographic processes
    Mounted optical elements; parts and accessories of mounted optical elements
    Stereoscopic microscopes, provided with a means for photographing the image
    Stereoscopic microscopes, other than those provided with a means for photographing the image
    Microscopes for microphotography, microcinematography or microprojection, provided with a means for photographing the image
    Parts and accessories for compound optical microscopes, including those for microphotography, microcinematography or microprojection
    Microscopes other than optical microscopes; diffraction apparatus
    Parts and accessories for microscopes other than optical microscopes, and for diffraction apparatus
    Telescopes as parts of machines, appliances, etc. of chapter 90 or section XVI
    Lasers, other than laser diodes
    Liquid crystal and other optical flat panel displays other than for articles of heading 8528
    Electrical direction finding compasses
    Optical instruments and appliances (other than compasses) for aeronautical or space navigation
    Automatic pilots for aeronautical or space navigation
    Electrical instruments and appliances (other than compasses) for aeronautical or space navigation
    Nonelectrical instruments and appliances (other than compasses) for aeronautical or space navigation
    Optical navigational instruments
    Ships' logs and depth-sounding apparatus
    Electrical navigational instruments and appliances
    Nonelectrical navigational instruments and appliances
    Parts and accessories of automatic pilots for aeronautical or space navigation of subheading 9014.20.40
    Parts and accessories of nonelectrical instruments and appliances for aeronautical or space navigation of subheading 9014.20.80
    Parts and accessories of nonelectrical navigational instruments and appliances nesoi of subheading 9014.80.50
    Parts and accessories of navigational instruments and appliances
    Rangefinders, other than electrical
    Electrical theodolites and tachymeters
    Theodolites and tachymeters, other than electrical
    Electrical photogrammetrical surveying instruments and appliances
    Photogrammetrical surveying instruments and appliances, other than electrical
    Optical surveying, hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances
    Seismographs
    Surveying, hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, nonoptical
    Electrocardiographs
    Printed circuit assemblies for electrocardiographs
    Parts and accessories of electrocardiographs, other than printed circuit assemblies
    Ultrasonic scanning electro-diagnostic apparatus used in medical, surgical, dental or veterinary sciences
    Magnetic resonance imaging electro-diagnostic apparatus used in medical, surgical, dental or veterinary sciences
    Scintigraphic electro-diagnostic apparatus used in medical, surgical, dental or veterinary sciences
    Electro-diagnostic apparatus for functional exploratory examination, and parts and accessories thereof
    Electro-diagnostic patient monitoring systems
    Printed circuit assemblies for electro-diagnostic parameter acquisition modules
    Electro-diagnostic apparatus nesoi, and parts and accessories thereof nesoi
    Ultraviolet or infrared ray apparatus used in medical, surgical, dental or veterinary sciences, and parts and accessories thereof
    Optical instruments and appliances nesoi, used in medical, surgical, dental or veterinary sciences, and parts and accessories thereof
    Anesthetic instruments and appliances nesoi, used in medical, surgical, dental or veterinary sciences, and parts and accessories thereof
    Electro-surgical instruments and appliances nesoi, other than extracorporeal shock wave lithotripters and parts and accessories thereof
    Electro-medical instruments and appliances nesoi, and parts and accessories thereof
    Pacemakers for stimulating heart muscles, excluding parts and accessories thereof
    Computed tomography apparatus based on the use of X-rays
    Apparatus based on the use of X-rays for dental uses (other than computed tomography apparatus)
    Apparatus based on the use of X-rays for medical, surgical or veterinary uses (other than computed tomography apparatus)
    Apparatus based on the use of X-rays other than for medical, surgical, dental or veterinary use
    Apparatus based on the use of alpha, beta or gamma radiations, for medical, surgical, dental or veterinary use
    Apparatus based on the use of alpha, beta or gamma radiations, other than for medical, surgical, dental or veterinary use
    X-ray tubes
    Radiation generator units
    Radiation beam delivery units
    X-ray generators, high tension generators, desks, screens, examination or treatment tables, chairs and similar apparatus
    Parts and accessories of X-ray tubes
    Parts and accessories of apparatus based on the use of X-rays
    Parts and accessories of apparatus based on the use of alpha, beta or gamma radiations
    Machines and appliances for testing the mechanical properties of metals
    Machines and appliances for testing the mechanical properties of materials other than metals
    Parts and accessories of machines and appliances for testing the hardness, strength, compressibility, or other properties of materials
    Electrical instruments and apparatus for measuring or checking the flow or level of liquids
    Electrical instruments and apparatus for measuring or checking the pressure of liquids or gases
    Electrical instruments and apparatus for measuring or checking variables of liquids or gases
    Parts and accessories of electrical instruments and apparatus for measuring or checking variables of liquids or gases
    Parts and accessories of nonelectrical flow meters, heat meters incorporating liquid supply meters and anemometers
    Parts and accessories of nonelectrical instruments and apparatus for measuring or checking variables of liquids or gases
    Electrical chromatographs and electrical electrophoresis instruments
    Nonelectrical chromatographs
    Electrical spectrometers, spectrophotometers and spectrographs using optical radiations (ultraviolet, visible, infrared)
    Nonelectrical spectrometers, spectrophotometers and spectrographs using optical radiations (ultraviolet, visible, infrared)
    Exposure meters
    Electrical instruments and apparatus using optical radiations (ultraviolet, visible, infrared)
    Nonelectrical instruments and apparatus using optical radiations (ultraviolet, visible, infrared)
    Nuclear magnetic resonance instruments
    Electrical instruments and apparatus for physical or chemical analysis, measuring viscosity, checking heat, sound, light, etc.
    Nonelectrical instruments and apparatus for physical or chemical analysis, measuring viscosity, checking heat, sound or light
    Printed circuit assemblies for instruments and apparatus of subheading 9027.80
    Parts and accessories of electrophoresis instruments not incorporating an optical or other measuring device
    Parts and accessories of electrical instruments and apparatus of subheading 9027.20, 9027.30, 9027.50 or 9027.80
    Other parts and accessories of other electrical instruments and apparatus of heading 9027
    Parts and accessories of nonelectrical optical instruments and apparatus of subheading 9027.20, 9027.3, 9027.4, 9027.50 or 9027.80
    Parts and accessories of nonelectrical nonoptical instruments and apparatus of heading 9027.20, 9027.3, 9027.4, 9027.50 or 9027.80
    Parts and accessories of nonelectrical instruments and apparatus of heading 9027
    Parts and accessories for gas, liquid or electricity supply or production meters
    Instruments and apparatus for measuring or detecting ionizing radiations
    Oscilloscopes and oscillographs, specially designed for telecommunications
    Resistance measuring instruments
    Other instruments and apparatus, for measuring or checking electrical voltage, current, resistance or power, without a recording device
    Instruments and apparatus, for measuring or checking electrical voltage, current, resistance or power, with a recording device
    Instruments and apparatus specially designed for telecommunications
    Instruments and apparatus for measuring or checking electrical quantities: for measuring or checking semiconductor wafers or devices
    Printed circuit assemblies for instruments and apparatus for measuring or detecting ionizing radiation
    Parts and accessories for instruments and apparatus for measuring or detecting ionizing radiation
    Printed circuit assemblies for subheadings and apparatus of 9030.40 & 9030.82
    Printed circuit assemblies
    Parts and accessories for instruments and apparatus for measuring or checking semiconductor wafers or devices
    Parts and accessories for articles of subheadings 9030.20 to 9030.40, 9030.83 and 9030.89 nesoi
    Machines for balancing mechanical parts
    Test benches
    Optical measuring/checking instruments/appliances for inspecting semiconductor wafers/devices or photomasks/reticle used to mfg such devices
    Profile projectors
    Optical coordinate-measuring machines
    Optical instrument & appliance: to inspect masks (not photomask) used to mfg semiconductor devices; to measure contamination on such devices
    Other optical measuring or checking instruments, appliances and machines
    Electron beam microscopes fitted with equipment specifically designed for the handling and transport of semiconductor devices or reticles
    Measuring and checking instruments, appliances and machines
    Parts and accessories of profile projectors
    Parts & accessories of measuring & checking optical instruments & appliances of subheading 9031.41 or 9031.49.70
    Parts & accessories of measuring & checking optical instruments & appliances, other than test benches or profile projectors
    Parts and accessories of articles of subheading 9031.80.40
    Parts and accessories of measuring or checking instruments, appliances and machines
    Automatic thermostats
    Automatic manostats
    Hydraulic and pneumatic automatic regulating or controlling instruments and apparatus
    Automatic voltage and voltage-current regulators, designed for use in a 6, 12, or 24 V system
    Automatic voltage and voltage-current regulators, not designed for use in a 6, 12, or 24 V system
    Automatic regulating or controlling instruments and apparatus
    Parts and accessories of automatic voltage and voltage-current regulators designed for use in a 6, 12, or 24 V system
    Parts and accessories of automatic voltage and voltage-current regulators, not designed for use in a 6, 12, or 24 V system
    Parts and accessories for automatic regulating or controlling instruments and apparatus
    LEDs for backlighting of LCDs
    Touch screens without display capabilities for incorporation in apparatus having a display
    Other parts and accessories for machines, appliances, instruments or apparatus of chapter 90

    Because Beijing is unhappy with Washington, China will punish the people and companies in China that buy the following things from the USA:

    Fruits and nuts
    Fresh apricot _ _ Fresh sour cherries _ _ Other fresh cherries
    Peach, including fresh nectarine _ _ Fresh plum and plum
    Fresh strawberries _ _ Fresh raspberry, blackberry, mulberry and roganberry
    Fresh currant and gooseberry _ _ Fresh Cranberries and Bilberries
    Kiwifruit _ _ Fresh Durian _ _ Persimmon _ _ Fresh Litchi _ _ Fresh Longan
    Bright red Maodan _ _ Fresh Litchi _ _ Fresh Carambola _ _ Fresh lotus fog
    Fresh Pitaya _ _ dried apricots _ _ Mei Qiang and Li Gan
    Dried apples _ _ Dried longan and meat _ _ Dried persimmons _ _ Dried red dates
    Dried Litchi _ _ Assorted nuts or dried fruits

    Grain
    Durum wheat _ _ Wheat and mixed wheat _ _ Corn
    Use of glutinous rice paddy _ _ Paddy rice _ _ Coarse Brown Rice
    Polished rice _ _ Broken rice _ _ Other broken rice _ _ Fine corn powder
    Sticky Rice Fine Powder _ _ Glutinous Rice Coarse Grain and Coarse Rice
    Yellow Soybean _ _ Black soybean _ _ Aromatic meal and pellets
    Rutabaga, fodder beet and other plant feeds _ _ Cotton linters

    Meats
    Fine and juice of meat and aquatic products _ _ Atlantic salmon
    Carp _ _ Sardine _ _ Tuna _ _ Eel, _ _ Cod _ _ Carp
    Shark fins, manufactured or preserved _ _ Canned shark fins
    Tilapia _ _ Catfish, _ _ Other shadtail cod
    Salmon caviar _ _ Snapper Caviar Substitute
    Crabs, _ _ Shrimp and shrimp, in non-hermetic packaging
    Other shrimp and shrimp _ _ Lobsters, _ _ Freshwater crayfish
    Oysters, _ _ Scallops, , including sea fan _ _ Mussels,
    Cuttlefish and mackerel, _ _ Octopus Cockles and boats
    Abalones, _ _ Snails and snails, , other than conch shells
    Sea cucumbers, _ _ Sea urchins, _ _ Sea oysters,

    Beverages
    Cranberries Made Without Vinegar _ _ Frozen orange juice
    Non-frozen orange juice with Brix not exceeding 20
    Modified ethanol and other alcohols of any concentration
    Whiskey

    Tobacco
    Flue-cured tobacco partially Partially or totally deterred tobacco
    Tobacco waste _ _ Tobacco Cigars _ _ Cigarettes made of tobacco
    Cigars and cigarettes made of tobacco substitutes
    Homogenized or "reconstituted" tobacco
    Articles made of other tobacco and tobacco substitutes; tobacco essence

    Uncombed cotton

    Vehicles
    Off-road vehicles and passenger cars, 1.5L or larger displacement
    Hybrid Electric SUVs , 1.5L or larger displacement
    Hybrid Electric Vehicles with Lit Engines (pluggable)
    Hybrid Electric Vehicle with Compression Ignition Engine (pluggable)
    Electric vehicles
    Trucks with a spark-ignition engine, vehicle weight <= 5 tons
    Gearboxes and their parts, not elsewhere specified for motor vehicles

    Fuel
    Unformed anthracite _ _ Unformed coking bituminous coal
    Briquettes and similar solid fuels _ _ Lignite
    Peat _ _ Coke and Semi-Coke _ _ Charcoal
    Gas, water, gas and similar gases _ _ Coal tar and other mineral tar
    Crude Benzene _ _ Crude Toluene _ _ Crude xylene
    Naphthalene _ _ Creosote _ _ Phenol
    Asphalt tar _ _ Asphalt coke made from tar _ _ Crude oil
    Vehicle Gasoline and Aviation Gasoline _ _ Naphtha
    Rubber Solvent Oil, Paint Solvent Oil, Extraction Solvent Oil
    Terpenes _ _ Other light oil fractions _ _ Aviation kerosene
    Lamp kerosene _ _ Fuel Oil No. 5-7 _ _ Diesel
    Lubricants _ _ Grease _ _ Lubricant Base Oil
    Liquid paraffin and heavy liquid paraffin _ _ Other heavy oil and heavy oil products
    PCBs, PCTs, or PBBs Waste oil
    Liquefied Propane _ _ Liquefied butane filling cigarette lighters
    Liquefied ethylene, propylene, butanes and butadiene
    Other LPG and Hydrocarbon Gases _ _ Gaseous Natural Gas
    Gaseous petroleum gas and other hydrocarbon gases _ _ Vaseline
    Paraffin wax _ _ Microcrystalline wax
    Uncalcined petroleum coke _ _ Petroleum asphalt
    Asphalt shale, oil shale and tar sands _ _ Natural Asphalt (Asphalt)
    Emulsified asphalt _ _ Asphalt rock _ _ 1,2-Dichloroethane (ISO)
    Acrylonitrile _ _ Non-ionic organic surfactants
    Mineral oil <70% lubricant _ _ Lubricants extracted from bituminous minerals
    Adhesives based on other rubber or plastics
    Supported catalysts based on noble metals and their compounds as actives
    Reaction Initiators, Reaction Promoters, Catalysts
    Diagnostic or experimental reagents
    Contains aldrin, toxaphene, chlordane, chlordecone, DDT _ _ Contains 1,2,3,4,5,6-HCH[6]
    Mainly from (5-ethyl-2-methyl-2-oxo-1,3,2-dioxaphosphorin-5-yl) Dimethyl Methyl Phosphonate and Bis[(5-Ethyl-2-methyl-2-oxo-1,3,2-dioxine) Phosphine-5-yl) methyl]methyl phosphonate (FRC-1) Mixtures and products
    Polyethylene with a primary shape specific gravity < 0.94
    Ethylene-α-olefin copolymers, specific gravity less than 0.94
    Primary vinyl polymers _ _ Primary shapes of pure polyvinyl chloride
    Primary shapes of acrylic polymers _ _ Primary-shaped polyethers
    Primary Shaped Epoxy Resin _ _ Primary Shaped Polycarbonate
    Polyamide-6,6 Sections _ _ Aromatic polyamides and their copolymers
    Semi-aromatic polyamides and their copolymers _ _ polyamides of primary shape
    Polysiloxane of primary shape _ _ primary polysulfides, polysulfones
    Primary Shaped, Unplasticized Cellulose Acetate
    Self-adhesive plastic plates, sheets, films and other materials
    Vinyl polymer plates, sheets, films, foils, etc.
    Polyethylene Terephthalate Plate Film Foil Strips _ _ Plastic non-foam plastic sheets
    Plastic plates, sheets, films, foil and strips_ _ Halogenated butyl rubber sheets, sheets, strips

    Equipment
    Magnetic Resonance Imaging Kit _ _ Patient Monitor
    Ophthalmology apparatus and instruments
    Medical, surgical or veterinary instruments and apparatus

    Trust me?
    I'm an economist!

  12. #252
    Senior Contributor antimony's Avatar
    Join Date
    22 Feb 08
    Location
    Seattle, WA
    Posts
    4,135
    As I have been saying, the right way to deal with Trump and family is through bribery and corruption. The Western governments need to wake up to this and start offering him prime land deals for his real estate development and/ or kickbacks, all the while massaging his ego. The non western world has already woken up to this. Every other little tinpot dictator is handled this way, why not Trump?

    And not that it cannot be done. Little Donny Jr. has already made at least 15 mn from his India trip.
    "Is God willing to prevent evil, but not able? Then he is not omnipotent. Is he able, but not willing? Then he is malevolent. Is he both able and willing? Then whence cometh evil? Is he neither able nor willing? Then why call him God?" ~ Epicurus

  13. #253
    Senior Contributor
    Join Date
    03 Sep 17
    Posts
    1,085
    Quote Originally Posted by antimony View Post
    Ah, thanks for making that clear. I was expecting something more dramatic and punitive than "He blamed the Brits". In other words, he did nothing apart from issuing some whiny-ass statements.
    He did more than that. He gave Syria to Putin. However, he could not punish the Brits for the very action that he himself was seeking for a way out of his Red Line, Congressional Approval.

    Quote Originally Posted by DOR View Post
    Every memoir I’ve seen has it exactly the other way around.

    Snowden was camped out in the Moscow airport, and Obama asked Putin to send him back. Putin gave him asylum, so Obama cancelled the planned summit meeting. That's the background to the state of tension between the US and Russia.

    A month or two later, in August 2013, Assad killed some 1,400 of his own people with chemical weapons. Secretary of State John Kerry said it was time to remove his chemical weapons ability, and perhaps to remove Assad from power. Obama said he had the power and the will to go into Syria and destroy its chemical weapons capability, but that he would ask for congressional approval. That's for the haters who say he was abusing presidential authority.
    His Red Line in the Sand had nothing to do Congress. He didn't seek Congressional Approval for Lybia, bombing ISIL, nor taking out OBL. Congress was his way of chickening out when there was no popular support for his actions.

  14. #254
    Senior Contributor
    Join Date
    03 Sep 17
    Posts
    1,085
    Quote Originally Posted by antimony View Post
    The non western world has already woken up to this. Every other little tinpot dictator is handled this way, why not Trump?
    Really? Putin had no relief despite having a "good relationship" with Trump and Xi just got slapped with $50bil in tarrifs.

  15. #255
    Senior Contributor antimony's Avatar
    Join Date
    22 Feb 08
    Location
    Seattle, WA
    Posts
    4,135
    Quote Originally Posted by WABs_OOE View Post
    Really? Putin had no relief despite having a "good relationship" with Trump and Xi just got slapped with $50bil in tarrifs.
    You obviously missed the ZTE news, and Putin has Trump batting for him across the board. Also, 300 Russian mercs dead is a cheap deal if Putin can get the entire Western worls in disarray.
    "Is God willing to prevent evil, but not able? Then he is not omnipotent. Is he able, but not willing? Then he is malevolent. Is he both able and willing? Then whence cometh evil? Is he neither able nor willing? Then why call him God?" ~ Epicurus

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (1 members and 1 guests)

  1. astralis

Similar Threads

  1. Review: Man of Steel
    By gunnut in forum Movie & TV Room
    Replies: 8
    Last Post: 12 Jul 13,, 11:15
  2. This Guy Has Balls of Steel
    By Bigfella in forum World Affairs Board Pub
    Replies: 34
    Last Post: 07 Jul 09,, 02:37
  3. Mexico slaps tariffs on U.S. goods in truck feud
    By Donnie in forum International Economy
    Replies: 15
    Last Post: 18 Mar 09,, 20:46
  4. U.S airforce using transparent aluminum?
    By canoe in forum Military Aviation
    Replies: 1
    Last Post: 21 Oct 05,, 04:58
  5. EU scores steel victory over US
    By Ironduke in forum International Economy
    Replies: 12
    Last Post: 11 Nov 03,, 21:15

Share this thread with friends:

Share this thread with friends:

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •