Page 3 of 3 FirstFirst 123
Results 31 to 34 of 34

Thread: 1966 Ford Fairlane GTA

  1. #31
    Senior Contributor Builder 2010's Avatar
    Join Date
    23 May 11
    Louisville, KY, USA

    GTA: Interior Finishing

    Thanks, we all appreciate the positive vibes!

    Well... you know, you're never too late to start. Now I can imagine that there's a pretty steep learning curve, but there's so much how-to stuff on YouTube that you can become pretty good pretty quickly. I've been modeling for 64 years and learned new stuff looking at a YouTube video yesterday, and I'm always trying out new materials, techniques and skills. What could be an entry barrier is the $,$$$ of tools that I've collected over the years, but you don't need all that to get started. It's the exact same thing as setting up a kitchen. You can cook good food with a couple of decent pots, a frying pan and some basic utensils. And you can also create masterpieces with a kitchen full of specialized stuff that just does one thing better.

    Using more standard aluminum foil (actually some product that I bought in Germany 15 years ago which is a thinner gauge than standard US foil) and Microscale foil adhesive I applied the foil to the broader surfaces of the console. The outer edges are bright and the inner sections are brushed on the real car. I used the non-shiny side of the foil for this to give a little contrast. The bright, as I noted yesterday, was provided by that really cool Liquid Chrome pen.

    Name:  GTA Console Chrome.JPG
Views: 91
Size:  968.8 KB

    I used Tamiya Clear Blue and Clear Red to detail that little GTA emblam on the upper console.

    I added the auto trans shift level and then CA'd the console into the car.

    Name:  GTA Console Installed.jpg
Views: 93
Size:  656.5 KB

    The dashboard needed some modification. Becuase of the shape of the door hinges I had to cut relief holes in the kick plate on the interior sides, but I also need to add this clearance to the dash component itself. There's already very little stock left on the left side, so if I cut some of the dash away in that area, there will be effectively nothing holding the dash on the left side. I needed to add more material onto the dash which would then be glued to the inner left panel.

    Name:  GTA Dash Mod Start.JPG
Views: 92
Size:  878.1 KB

    I added another piece of styrene stock under this piece to add some more meat and then glued the dash into place.

    Name:  GTA Dashboard Mod.jpg
Views: 91
Size:  544.5 KB

    The dash tab will be cut away, but the new stock will hold it in place. To add more strength I'm going to drill and put some 0.021" brass pins through the inner panel into the added stock. That should tie it all together when I take a small router and cut the dash tab away to clear the hinge bulge.

    The last thing I did was prepare the steering wheel and column. This was a perfect use for the Liquid Chrome pen to "chrome" the horn ring. The picture doesn't do it justice. It looks absolutely like chrome, not paint. Tomorrow I'll install the wheel.

    Name:  GTA Steering Wheel Chrome.JPG
Views: 91
Size:  300.0 KB

    I painted and installed the battery, and the master cylinder. I'm going to add some battery leads. Any suggestions on making a realistic battery lead connector?

    I'm quickly getting to the point where I'm going to have to paint the exterior. I'm using lacquer and don't want to use it indoors and I don't have a spray booth (yet), and usually do this work outside, but the weather's getting like Winter and that doesn't work.

  2. #32
    Senior Contributor Builder 2010's Avatar
    Join Date
    23 May 11
    Louisville, KY, USA

    GTA: More Door Work

    Today, I split my session doing some train work (attempting to replace a broken headlight with an LED) and some GTA work.

    I routed the dash to give proper clearance for the door hinges. I've purchased some 1/16" solid carbide router bits from Drill Bits Unlimited that work nicely in the Dremel. I didn't ahve to remove much, just enough to let the hinge loop sit inside so the inner panel and outer body don't get pushed out of position.

    Name:  GTA Dash Hinge Relief.JPG
Views: 87
Size:  801.7 KB

    The cut in this picture is a bit ragged. I cleaned it up a bit and then painted it semi-gloss black. I also installed the steering column today, but the pics don't show it.

    I needed to make door jambs for the body side of the door opening. I didn't attempt to have the rear jamb sit inside the body. Instead I installed it so it fit flush with the body. My door is fitting a bit big some a little bit of extra stock wouldn't hurt. In this picture, I filed it to fit and then added some Tamiya putty to fill in any noticeable blemishes. In the real world, there is some kind of lock system on the body and door jams. I don't think I'm going to add that, but then I've been known to do this silly stuff.

    Name:  GTA Body Door Jamb Rear.JPG
Views: 87
Size:  879.3 KB

    For the hinge side body jamb I had to inset this piece since the door hinges into the body space. I used thin 0.010" sytrene for these parts and it was easy to get them to conform to any curves. After using liquid cement I went back and reinforced the joints with med CA. After which I again added some filler to close the gaps that were left.

    Name:  GTA Body Door Jamb frt.JPG
Views: 87
Size:  895.9 KB

    I took another picture with the door fitted. I used the flash so you're getting a lot of specular reflections. You can barely see te front jamb and you can see that the dash area is now painted.

    Name:  GTA Body Door Jamb ft.JPG
Views: 86
Size:  777.5 KB

    What's going to be fun is putting the outside body color onto these jamb areas. I've been looking at a lot of videos of people building model cars, and generally folks don't open up the doors. It greatly complicates the process since the door, which is now a single piece has the inner and outer panels glued together. The inner is interior trim colors and the outer body color and the jamb is body color. The flash shows some interior space behind the dash that needs to have come color. On second thought, that's the firewall and without the flash blast you would'nt see it since it's going to be very dark under there. Sometimes it's good to take pictures of your work for evaluation purposes.

    Without digital photography, all this journaling and posting would be nearly impossibe and very, very expensive.

  3. #33
    Senior Contributor Builder 2010's Avatar
    Join Date
    23 May 11
    Louisville, KY, USA

    GTA: Odds and Ends

    I have reached the point where the body painting needs to be done. Lacquer is a no-no indoors and it's not good for outside painting now. I did some odds and ends today. Got the battery wired up, finished the door jambs, painted the wheels and taillights, and blacked out all the grills and trim that had black lines in them.

    I cobbled some battery connectors out of wine bottle foil. They're a bit crude and oversized, but they convey the feeling. The leads are 28 gauge black iron wire painted red for the positive lead going over to the molded on started relay. I also did some more detail painting in the engine compartment.

    Name:  GTA Battery Cables.jpg
Views: 82
Size:  621.1 KB

    So now the engine is completely finished.

    I sanded off the excess filler on the door jambs and they're ready for paint. I also found and removed some mold lines on the body. This is ready for paint.

    Name:  GTA Door Jamb Finished.JPG
Views: 83
Size:  840.0 KB

    I removed the vinyl wheel centers and built the four wheels. The chrome steel wheels had open spokes and blacked out areas between. I painted the blacked out areas flat black. I actually enjoy doing detail painting. I find it calming.

    Name:  GTA Wheel Black out.jpg
Views: 82
Size:  713.5 KB

    To black out the open areas of the grill and on some of the trim, I simply used some thinned Tamiya flat black which I let run down the grooves and used a cotton bud to remove the excess from the chrome. If I had some Tamiya panel line color in black I would have used that. I have that product in brown and it wouldn't work.

    Name:  GTA Grill Trim composite.jpg
Views: 83
Size:  765.9 KB

    The last thing I did was use the Liquid Chrome pen to detail the backup light section of the red taillight lenses. The chrome pen was the perfect tool to add some real bright effects to these tiny parts.

    Name:  GTA Taillamp Chrome.JPG
Views: 82
Size:  912.1 KB

    So, if I can't figure out how to effectively do the exterior color in the winter, I might put this aside until Spring. I have another kit to build, a Trumpeter 1:350 scale USS Essex. I have some Photoetched leftover from the Missouri project and may be able to detail the Essex without having to buy more. Most of the color for the Essex will be water-based and can be applied in the basement. I'm lobbying the CEO to get a spray booth which would be a wonderful addition to the shop.

  4. #34
    Senior Contributor Builder 2010's Avatar
    Join Date
    23 May 11
    Louisville, KY, USA

    GTA: Just a little bit of work

    Well... the weather may actually be mild enough in the next couple days to enable me to spray some GTA parts. So to get ahead of this eventuality, I did a few minutes work on the model masking the engine compartment and the inner door panel so I could spray the primer and light yellow outside. It's all predicated on the temps hitting 60 degrees or more. The fender panels actually wrap over that flange in the engine compartment and it's painted body color which accounts for all that masking to expose such a little bit of paint area.

    Name:  GTA Masking.JPG
Views: 48
Size:  755.5 KB

    Until next time, meanwhile keep tracking my Essex build.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CVN-78 Gerald W Ford
    By surfgun in forum Naval Warfare
    Replies: 373
    Last Post: 21 Jan 18,, 23:53
  2. Ford does not need US government loans: CEO
    By xrough in forum International Economy
    Replies: 11
    Last Post: 04 Feb 09,, 23:58
  3. Obama blasts Detroit, Ford again
    By gunnut in forum American Politics & Economy
    Replies: 9
    Last Post: 08 May 08,, 21:43
  4. CVN-78: USS Gerald R Ford
    By TopHatter in forum Naval Warfare
    Replies: 5
    Last Post: 05 Jan 07,, 05:50

Share this thread with friends:

Share this thread with friends:

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts