PDA

View Full Version : Su-152



Nord
23 Jan 12,, 11:49
http://armor.se/img/pansar_1_35/SU-152-out.jpg

The SU-152 (СУ-152) was a Soviet heavy self-propelled heavy howitzer used during World War II.

It mounted a 152 mm gun-howitzer on the chassis of a KV-1S heavy tank. Later production used IS tank chassis and was re-designated as ISU-152. Because of its adopted role of as an impromptu heavy tank destroyer, capable of knocking out the heaviest German armoured vehicles—Tiger and Panther tanks, and Elefant tank destroyers—it was nicknamed Zveroboy, "beast killer".

Development

The Stalingrad counteroffensive, Operation Uranus, exposed the Red Army's urgent need for mobile heavy guns. Primary targets for these guns were German fortifications in and around Stalingrad. At the time Soviet front-line ground units did not possess sufficient firepower to deal with pillboxes and other fortifications.

Close support of artillery and combat engineers was an important factor in the success of Operation Uranus. However, with rare exceptions, all Soviet guns and howitzers at this time were towed rather than self-propelled. This lack of mobility proved to be greatly exacerbated by the absence of roads, the presence of deep snow cover and a scarcity of artillery tractors. Towed guns were also highly vulnerable to counterattack while on the move, especially since they were often hauled by horses or their own crews. The 152 mm heavy howitzers were particularly difficult to maneuver; owing to their great weight and narrow steel wheels, they were incapable of crossing rivers on anything but tank bridges and were prone to becoming hopelessly mired and needing to be abandoned by their crews.

This situation did not satisfy the state authorities. In November 1942 the State Defense Committee ordered the development of a heavy self-propelled gun armed with the 152.4mm ML-20 howitzer. It should be noted that the Red Army had dedicated anti-fortification vehicles in the pre-war period, such as the KV-2 heavy tank armed with the 152.4 mm M-10 howitzer. The design proved unsatisfactory for numerous reasons, including a lethally-high silhouette, a sluggish and barely-functional manual turret traverse, a slow reload rate, and a high center of gravity which risked tipping the vehicle over when attempting to surmount even small obstacles. Mass production of KV-2s ceased in July 1941 and a few survived to November 1942. The new anti-fortification vehicle was designed with the same purpose in mind, but with higher mobility, heavier armor, reduced production cost, and the more powerful and accurate ML-20 152mm gun. Mounting the ML-20 in a turret was impossible due to its length and recoil, and it was eventually decided that the new vehicle should have a non-rotating gun mounted in a fixed casemate-style superstructure.

Prior to the issue of the State Defense Committee order there were several other anti-fortification vehicle projects, all of which were halted. Later in the war these projects were restarted. In December 1942 three different designs of "pillbox killer" vehicles were introduced by various engineer groups from the major Soviet artillery and tank factories. All of these designs used the ML-20 gun as a primary armament, with the KV-1S heavy tank chassis. After some discussion, the project of Joseph Yakovlevich Kotin was chosen for further mass production. This design successfully combined the ML-20 and KV-1S chassis with minimal expense.

The entire project was designated "KV-14" and assembly of the first prototype (called "Object 236") began on December 31, 1942. It was completed after 25 days. Plant trials of "Object 236" began on January 25, 1943. After a number of successful plant tests the more stringent state tests began. "Object 236" succeeded again. On February 14, 1943 the State Defense Committee accepted it for Red Army service and immediately launched it into mass production at the Chelyabinskiy Kirovskiy Zavod (Chelyabinsk Kirov Plant, ChKZ). The designation of the series of self-propelled guns was changed from KV-14 to SU-152. The ML-20 gun was slightly modified for mounting in the SU-152 — some handles were moved for improved gunner comfort. This variant had the designation ML-20S. The muzzle velocity and external ballistics were identical to the original towed ML-20 gun.

Although designed with no consideration for the anti-tank role, the SU-152 proved to have surprisingly good anti-tank capabilities due to the ML-20S's extremely heavy HE projectiles. Standard doctrine for purpose-built AT guns of the period universally relied on small, dense solid projectiles propelled to high velocities, optimized for punching through armor. Since the SU-152, like all SU-series self-propelled guns was not designed with tank killing in mind, no AP projectiles were issued to crews and no initial tests against armor were conducted. However, tests performed on captured Tiger tanks in early 1943 showed that the SU-152 was able to destroy them at any range with a fair degree of reliability (the only vehicle then in Russian service capable of doing so) by simply blowing the turret off the vehicle through sheer blast effect. This fortuitous discovery spurred massive SU-152 production and the formation of self-propelled artillery units, which then functioned as ersatz heavy tank destroyer battalions.

After the launch of SU-152 mass production the design was slightly modified to improve reliability. Initially the SU-152 lacked a machine gun, which was recognized as a severe weakness in urban warfare and other close combat. To solve this problem the DShK 12.7 mm anti-aircraft gun installation was developed in the summer of 1943. Some SU-152s received it after repair. The SU-152 was the last member of the KV family of tanks in mass production, and was replaced by the ISU-152 on the ChKZ production lines in December 1943. The exact number of SU-152s produced differs even in Russian sources, with the most common figures being 670 or 704. The SU-152s that survived World War II were withdrawn from Soviet Army service in 1954.